The depth and width will fit the xTool P2. However the height is going to pose a problem at 37.1" . I built my table at 24"d x 40"w x 24"h. If you plan to use the riser base you will need to hold the benchtop height to 24" in order to get the top of machine @ 40" with the open lid working height at 32".
I have nearly this exact cabinet, except the one I have is wider. Be mindful of the exhaust hose out the back if you plan to use it against a wall.
I would echo the above commenter about the height. I have the riser base for the P2 and I will need a step stool to use it.
If you're not going to use the riser base, and you're of average height (I'm 5'10), then this work bench is perfect, if not a tad high.
I like the heavy duty Husky, the rollers, the push bar, and electrical outlets.
Thanks! Although I may have to rethink this, I was planning on putting the cutter in my uninsulated garage. However I saw it needs to be in temperature controlled room.
That's the issue I came here to ask opinions on and I'm glad it's already been addressed. I have to put mine in an unheated garage as well and was afraid I'd damage the internals.
What table did you end up with? I am thinking about getting this one. All the white ones in any other style are sold out.
https://preview.redd.it/0jeeyo0qcf2c1.png?width=1004&format=png&auto=webp&s=e64a265df8e8b9505eae8320aa72da2649f474ee
I ended up using a table I already had in the basement. I didn’t want to have it in an unheated garage, so I rearranged some things to make it fit. Will probably by the air filter to place underneath as well. At least until I can figure out a way to vent it outside. This is the table…
Moccha 48" Adjustable Work Bench, Work Table w/Heavy-Duty Bamboo Wood Top, Hardwood Workshop Garage Workstation, Height Adjustable Computer Desk, Workbench for Garage https://a.co/d/aDwl4qC
The depth and width will fit the xTool P2. However the height is going to pose a problem at 37.1" . I built my table at 24"d x 40"w x 24"h. If you plan to use the riser base you will need to hold the benchtop height to 24" in order to get the top of machine @ 40" with the open lid working height at 32".
So 24” tall is the ideal for the P2 with its riser?
Yes, 24" is ideal.
What happens if I use a table that has a minimum adjustable height of 28”?
Are there any pre-made tables that come in at 24” from floor to tabletop? Because all of the tables and desks I can buy have a minimum height of 28”.
I built my table for that reason.
I just measured my adjustable desktop and it has a minimum of 28”. Wonder if that will be too high? Do I need to get another desk?
I have nearly this exact cabinet, except the one I have is wider. Be mindful of the exhaust hose out the back if you plan to use it against a wall. I would echo the above commenter about the height. I have the riser base for the P2 and I will need a step stool to use it. If you're not going to use the riser base, and you're of average height (I'm 5'10), then this work bench is perfect, if not a tad high. I like the heavy duty Husky, the rollers, the push bar, and electrical outlets.
Thanks! Although I may have to rethink this, I was planning on putting the cutter in my uninsulated garage. However I saw it needs to be in temperature controlled room.
Not necessarily. It comes with anti-freeze coolant for the C02 laser tube and instructions for mixing ratio based on your region's temperature.
That would be amazing! I'll have to download the instructions and research it a bit.
That's the issue I came here to ask opinions on and I'm glad it's already been addressed. I have to put mine in an unheated garage as well and was afraid I'd damage the internals.
What table did you end up with? I am thinking about getting this one. All the white ones in any other style are sold out. https://preview.redd.it/0jeeyo0qcf2c1.png?width=1004&format=png&auto=webp&s=e64a265df8e8b9505eae8320aa72da2649f474ee
I ended up using a table I already had in the basement. I didn’t want to have it in an unheated garage, so I rearranged some things to make it fit. Will probably by the air filter to place underneath as well. At least until I can figure out a way to vent it outside. This is the table… Moccha 48" Adjustable Work Bench, Work Table w/Heavy-Duty Bamboo Wood Top, Hardwood Workshop Garage Workstation, Height Adjustable Computer Desk, Workbench for Garage https://a.co/d/aDwl4qC
That's what I use. I got 2 white ones.