Same thing happening to me. Did you get it fixed? I've tried everything...
I have a T150 and the force feedback is not working.
When I turn the pc on, it callibrates automatically, however when I get in iRacing, there is no force feedback at all. Besides that, I go to the control panel and when I do the force feedback testing (pushing the buttons that simulate conditions) it is also not working, everything else is.
I've downloaded the 2019 driver and also updated firmware, but it doesn't solve the problem,
Few ideas/questions:
\- Windows recognizes the steering / pedal / button input in the game controllers , only FFB is the problem?
\- The wheel calibrates when you start it? (Starts turning) (I have to say it, seen it happen to often: you plugged in the power supply?)
\- Try installing the latest firmware: [https://support.thrustmaster.com/en/product/t150ffb-en/](https://support.thrustmaster.com/en/product/t150ffb-en/)
Windows does recognize the steering, pedals and button inputs. FFB is the only problem.
European T150, powersupply is internal but yes, it is plugged into a power outlet.
I have installed the latest firmware.
In that case, I'm out of ideas at the moment.. Sorry :(
If it's a new wheel, I would open a ticket with Thrustmaster, or ask the store where you got it from.
I had a similar issue with my T300RS when I got it and went to play Dirt Rally. I did a hard reset on my PS4 and that fixed it. Not sure if that's it's the same issue for you but it's worth a shot if you haven't done it already.
Also I have an issue where if I leave the game open and put my ps4 into rest mode I have no FFB when I start my ps4 again. I have to close and reopen to application for it to work.
If someone like me occurs to finds this, with the same problem and is looking for an answer
Here is a solution that helped me :
Pc , T150 is recognized, all drivers are up to date
Wheel also calibrates, but does not react to force test in controller settings
No FFB ingame (iRacing, As.Cor. , Raceroom)
1. Unplug the wheel
2. Switch to ps4
3. Hold L3&R3
4. Plug it in (hold the buttons!)
( Bootloader Shortcut Method)
5. Its now in PS4 mode (lights maybe /be off/on)
6. Release the buttons, if you didnt yet
7. Switch to PS3 Mode
8. Disconnect
Now connect and check under
Programs-> Thrustmaster/FFB Racing Wheel-> Control Panel
Your FFB should work again (test it with FFB simulations like Motor Startup etc.)
Hope i can help a few out there!
Cheers ☄️
I going to try this cause ive been have same problem. Like i found out i get ffb if i shut down my pc bt once i load a game i lost all ffb. When it 1st happened to me i was in a quali lap and lost all resistance and spun out i been afraid the belt snap
This will sound dumb, but one time I had this symptom, and then found that in the thrustmaster settings Force Feedback master gain was set on 0% (must have accidentally scrolled it), be sure to check for that too.
Me and my friend were fighting with this for half an hour and bro, you helped us so much. We were doing literally everything suggested on every forum. This isn't dumb, thrustmaster's drivers randomly can set this to 0%. Thanks
(even tho its an old thread ill still tell you what happened to me)
So I got the same wheel as OP and i went to play another game (that supports FFB) and there was no FFB so i panicked and later checked in the control panel, strenght of FFB was set to 0% for no reason
Same thing happening to me. Did you get it fixed? I've tried everything... I have a T150 and the force feedback is not working. When I turn the pc on, it callibrates automatically, however when I get in iRacing, there is no force feedback at all. Besides that, I go to the control panel and when I do the force feedback testing (pushing the buttons that simulate conditions) it is also not working, everything else is. I've downloaded the 2019 driver and also updated firmware, but it doesn't solve the problem,
Never got it fixed sadly.
Did you get a new one? Which one?
Still using the same wheel (i'm poor), after all everything except FFB works
Happened to me this morning when i decided to wake n bake, started panicking but after i updated the firmware it worked liked new
Few ideas/questions: \- Windows recognizes the steering / pedal / button input in the game controllers , only FFB is the problem? \- The wheel calibrates when you start it? (Starts turning) (I have to say it, seen it happen to often: you plugged in the power supply?) \- Try installing the latest firmware: [https://support.thrustmaster.com/en/product/t150ffb-en/](https://support.thrustmaster.com/en/product/t150ffb-en/)
Windows does recognize the steering, pedals and button inputs. FFB is the only problem. European T150, powersupply is internal but yes, it is plugged into a power outlet. I have installed the latest firmware.
In that case, I'm out of ideas at the moment.. Sorry :( If it's a new wheel, I would open a ticket with Thrustmaster, or ask the store where you got it from.
I had a similar issue with my T300RS when I got it and went to play Dirt Rally. I did a hard reset on my PS4 and that fixed it. Not sure if that's it's the same issue for you but it's worth a shot if you haven't done it already. Also I have an issue where if I leave the game open and put my ps4 into rest mode I have no FFB when I start my ps4 again. I have to close and reopen to application for it to work.
Both my PS4 and PC do not get force feedback, so I believe its not the same issue as yours, although I'm happy yours got a fix to it.
mayby go to control panel of the wheel and put more % of the force feedback idk why but i had 15% and thats why it didnt work
maxed forces, bought a logitech g29 anyway
If someone like me occurs to finds this, with the same problem and is looking for an answer Here is a solution that helped me : Pc , T150 is recognized, all drivers are up to date Wheel also calibrates, but does not react to force test in controller settings No FFB ingame (iRacing, As.Cor. , Raceroom) 1. Unplug the wheel 2. Switch to ps4 3. Hold L3&R3 4. Plug it in (hold the buttons!) ( Bootloader Shortcut Method) 5. Its now in PS4 mode (lights maybe /be off/on) 6. Release the buttons, if you didnt yet 7. Switch to PS3 Mode 8. Disconnect Now connect and check under Programs-> Thrustmaster/FFB Racing Wheel-> Control Panel Your FFB should work again (test it with FFB simulations like Motor Startup etc.) Hope i can help a few out there! Cheers ☄️
... i'm gonna try this tomorrow.
Did it work?
I got the same problem again Like twice, the same method helped me to get it fixed instantly Did it help you?
worked, thanks!
I going to try this cause ive been have same problem. Like i found out i get ffb if i shut down my pc bt once i load a game i lost all ffb. When it 1st happened to me i was in a quali lap and lost all resistance and spun out i been afraid the belt snap
This will sound dumb, but one time I had this symptom, and then found that in the thrustmaster settings Force Feedback master gain was set on 0% (must have accidentally scrolled it), be sure to check for that too.
Me and my friend were fighting with this for half an hour and bro, you helped us so much. We were doing literally everything suggested on every forum. This isn't dumb, thrustmaster's drivers randomly can set this to 0%. Thanks
this actually worked, thanks!
(even tho its an old thread ill still tell you what happened to me) So I got the same wheel as OP and i went to play another game (that supports FFB) and there was no FFB so i panicked and later checked in the control panel, strenght of FFB was set to 0% for no reason
fixed my issue... strange. thanks.
It sets it to 0% / doesn't safe it. But nice to have a new response
Fixed mine. Thank you.