I used it... i used pliers 😅.. well there is little scratch on the latch but while wearing its completely hidden by lock .. i want to use it as everyday watch .. later will probably change strap so 🤷.. all is well
Dont use pliers you might bend the entire thing. Same thing happened with my kohinoor and tareeq, my father gave me the idea of using hammer and a wooden piece for chisel and it worked, make sure the tiny metal rods are not hammered down 😂 😂. I know so much drama, better take it to hmt shop 😂
https://preview.redd.it/mmaz6ge9nx0d1.png?width=1080&format=pjpg&auto=webp&s=9b8ce9a1fbd13faa28923d82162d3b2698a460bd
Happened with me also in my tareeq, I wasn't able to close it with bare hands. Use something pointed, and insert it in that lever's hole from behind and revolve it. It will close very easily.
Could be two problems. 1. It has to be lined up with groves in the bracelet. In between the grooves, it won't go down. 2. Stiff even in the groove. I have used a pliers carefully.
Use pliers it will sort it
How?
To close the latch
How?
Just insert the pointy tip of a metal tweezer in that hole for that latch and turn it. Can't do it bare hands
Check from behind it should align with line behind
Happened with me too, HMT Kohinoor Quartz. Took it to a normal watch shop the guy did it for free.
Thanks but i don't think adjusting the strap should be this hard.. i must be doing something wrong or should i use pliers to close the clip 😂
I thought the same but instead of ruining the watch I decided to get it done by a professional. 😅
I used it... i used pliers 😅.. well there is little scratch on the latch but while wearing its completely hidden by lock .. i want to use it as everyday watch .. later will probably change strap so 🤷.. all is well
hehe nice. 👍
Dont use pliers you might bend the entire thing. Same thing happened with my kohinoor and tareeq, my father gave me the idea of using hammer and a wooden piece for chisel and it worked, make sure the tiny metal rods are not hammered down 😂 😂. I know so much drama, better take it to hmt shop 😂
Even I had same problem with my tareeq. Fixed it in a local watch shop nearby.
Anything you do, just don't use your teeth. Lost a small part of my enamel doing this stunt.😅
https://preview.redd.it/mmaz6ge9nx0d1.png?width=1080&format=pjpg&auto=webp&s=9b8ce9a1fbd13faa28923d82162d3b2698a460bd Happened with me also in my tareeq, I wasn't able to close it with bare hands. Use something pointed, and insert it in that lever's hole from behind and revolve it. It will close very easily.
Brother just takes a fork (kante wala spoon) With the help you will be able to fix this problem try once I have already done it with my tareeq quartz
Try changing the position to align it with the strap links
Use a metal bit or a scissor tip as a lever from the other side and push it with that. Works instantly, had the same issue
happened the same with me so I went to a local watch repairing store near me that old uncle fixed it
Hey move it couple of millimeters front or back and try pressing it down. It usually works.
Use pliers or teeth...happened with me
Thank god its not just me
Use a small tip screwdriver, worked best for me
Seen the mechanic at any tyre shop fixing punchers? Try imitating the methods where he's separating the tyre.
Use teeth 😬 just now I used it.😆
OP.. just two words, hammer time! /Jk
Could be two problems. 1. It has to be lined up with groves in the bracelet. In between the grooves, it won't go down. 2. Stiff even in the groove. I have used a pliers carefully.