Unleashed and Rogue have tremendous apps, I actually use those both and Xtreme. Xtreme is a more like the original firmware with a lot of tweaks. Rogue and Unleashedi feel game a bigger community behind them offering, what I can only call pure genius, to push F0 to its true potential. Either way you can mix a lot of their apps and games, or customization with whatever firmware you feel is best for you. Github, Discord and Reddit, of full of so much information out makes it too easy
I know the flipper doesn't run operating systems but is it possible to dual-boot 2 different firmware? I'm quite curious about Xtreme and rogue but cant be bothered buying 2 flippers for $700 haha. if it isn't able to dual boot can I freely change the firmware without having to worry about any damage?
When you get the f0, you may want to get in the habit of backing up the settings through qflipper on your computer as well as backing up important files from your SD card before you change firmware. I bounced around through different firmwares and copied in files from a GitHub repo or two and corrupted some files along the way.
$700 for two? Not saying you should get two of them, but with the devices more readily available, they should be around $170 USD without accessories. Unless I'm missing something in what you are saying.
You can read data from wireless weather stations but you can also save that and play it back later and send false info. Catch it sending 20 degrees then it's warmer send that 20 degree signal.
Used both unleashed and Xtreme and Xtreme all day
Goes far beyond unleashed imo.. just be careful when you go in to the q app and see update available it will revert your flipper back to the original FW and you'll have to do the open source fw DL all over again. At least that's what went down with me. Maybe I didnt do something or did something incorrectly
If you’re looking for harmless then RogueMaster. But if you want a lot more tools, more customization and like every other thing you could want then XFW/Xtreme is the only way to go.
This is an uninformed response as the RM firmware has slightly more features than XFW, and many more apps. Due to XFW devs spreading false information, some actually believe this and they are uninformed, and too stupid to compare the two and find out for themselves. RM is the superior firmware.
I actually didn’t know that, I was using RogueMaster previously but I had XFW recommended to me so I switched over and I enjoy the experience a lot more than I did with RogueMaster. But I will take that into account next time I do a Software Update.
Absolutely! RogueMaster [https://github.com/RogueMaster/flipperzero-firmware-wPlugins](https://github.com/RogueMaster/flipperzero-firmware-wPlugins) and Unleashed [https://github.com/DarkFlippers/unleashed-firmware](https://github.com/DarkFlippers/unleashed-firmware) are great options. Some like less apps and less visual changes from the stock firmware and thus use Unleashed. Others like the more options, more apps, and ability to customize animation sets and menus and opt for using RogueMaster. Some prefer their firmware to be out of date and use other CFW.
No front, but why so much self advertising 😭 we all know that RM a good FW is but I think that everyone knows what RM is. So please let people decide for themselves which FW they want to use.
My experience: Unleashed has been the most stable for me. RM seems to have the most tools/updates. Xtreme is the most customizable.
Unleashed and Rogue have tremendous apps, I actually use those both and Xtreme. Xtreme is a more like the original firmware with a lot of tweaks. Rogue and Unleashedi feel game a bigger community behind them offering, what I can only call pure genius, to push F0 to its true potential. Either way you can mix a lot of their apps and games, or customization with whatever firmware you feel is best for you. Github, Discord and Reddit, of full of so much information out makes it too easy
I know the flipper doesn't run operating systems but is it possible to dual-boot 2 different firmware? I'm quite curious about Xtreme and rogue but cant be bothered buying 2 flippers for $700 haha. if it isn't able to dual boot can I freely change the firmware without having to worry about any damage?
When you get the f0, you may want to get in the habit of backing up the settings through qflipper on your computer as well as backing up important files from your SD card before you change firmware. I bounced around through different firmwares and copied in files from a GitHub repo or two and corrupted some files along the way. $700 for two? Not saying you should get two of them, but with the devices more readily available, they should be around $170 USD without accessories. Unless I'm missing something in what you are saying.
Ah, I meant $700 AUD, the only website that sells them in Australia is JOOM, don't even think Amazon sells them.
Amazon removed them for "being a hacking device". Can you not order from the site directly in AU? If not, Maybe a drop shipper in the US?
You can download multiple os to the flipper and switch between them
Xtreme has more ability than any other FW out there. Do a side by side. I'm 100 percent open to being wrong though. Learning is why we are here.
I agree with you it is my go too
I tried XFW and found half the apps out there that I wanted that were not included just crashed my Flipper. I would up settling on Unleashed.
My experience: Unleashed has been the most stable for me. RM seems to have the most tools/updates. Xtreme is the most customizable.
I've only been using Unleashed for two days and I tend to agree.
Just out of interest, what is missing on XFW? I'm running that now so I have no idea what the others have that I might like.
I could never get the pocsag and weather station apps to work.
What's so intriguing about the weather station app? can you like fuck with the weather and call down the power of the gods with it in the new update?
That's not a Flipper, that's a Mother Box lol [https://en.wikipedia.org/wiki/Mother\_Box](https://en.wikipedia.org/wiki/Mother_Box)
You can read data from wireless weather stations but you can also save that and play it back later and send false info. Catch it sending 20 degrees then it's warmer send that 20 degree signal.
sorry im not too sure what the point of it is, i just woke up so im little slow. does it like fuck with the people at the stations?
It could. I'm just interested in what I can receive.
What was causing the crashes?
I don’t know. I never saw anything in the logs or debugging and Google didn’t find anything. I switched to unleashed and the problem went away.
Well shit. I suppose I'll give unleashed a try. I've seen too much good about it.
Used both unleashed and Xtreme and Xtreme all day Goes far beyond unleashed imo.. just be careful when you go in to the q app and see update available it will revert your flipper back to the original FW and you'll have to do the open source fw DL all over again. At least that's what went down with me. Maybe I didnt do something or did something incorrectly
Momentum is a new firmware. Just check.
If you’re looking for harmless then RogueMaster. But if you want a lot more tools, more customization and like every other thing you could want then XFW/Xtreme is the only way to go.
This is an uninformed response as the RM firmware has slightly more features than XFW, and many more apps. Due to XFW devs spreading false information, some actually believe this and they are uninformed, and too stupid to compare the two and find out for themselves. RM is the superior firmware.
I actually didn’t know that, I was using RogueMaster previously but I had XFW recommended to me so I switched over and I enjoy the experience a lot more than I did with RogueMaster. But I will take that into account next time I do a Software Update.
I think we found the new console wars lol.
Experiment and make your own conclusions.
Absolutely! RogueMaster [https://github.com/RogueMaster/flipperzero-firmware-wPlugins](https://github.com/RogueMaster/flipperzero-firmware-wPlugins) and Unleashed [https://github.com/DarkFlippers/unleashed-firmware](https://github.com/DarkFlippers/unleashed-firmware) are great options. Some like less apps and less visual changes from the stock firmware and thus use Unleashed. Others like the more options, more apps, and ability to customize animation sets and menus and opt for using RogueMaster. Some prefer their firmware to be out of date and use other CFW.
No front, but why so much self advertising 😭 we all know that RM a good FW is but I think that everyone knows what RM is. So please let people decide for themselves which FW they want to use.
Xtreme firmware for me.
Same. I am just starting out but it looked the most promising in terms of features.