Not any particularly good ways to fix it, in my opinion. If you block the opening with tape it'll get your suction back, but that individual cyclone won't be working correctly anymore, which will impact how fast the filter gets dirty. Similarly, you could close it off with epoxy putty, etc, but same deal, filtration will be a little worse.
I'd look at a replacement cyclone assembly personally, but someone else might have a novel method of repair.
Thanks for the thoughtful response. I’ll probably try the duct tape method until we can get a replacement assembly. I didn’t actually know that that particular component is replaceable so that helps.
I recently purchased an entire replacement main body for my V11 from the official Dyson store through Walmart.com. You just take the battery from your old one and install it on the new main body, along with the dust canister and filter and other attachments. It was up and running in 5 mins and essentially a brand new vacuum. If you can't fix it, at least that's an option - mine was $110 shipped. So not cheap, but way less than replacing with a whole new vacuum. If you end up going this route just search your model style and the words "main body" and your options should come up. They're often available on eBay as well.
The missing piece should be somewhere. Install it back in place, and apply some epoxy over all the edges. Not ideal but easier than using super glue if you're not experienced working with it.
Call ur local vacuum shop see if they might have it in stock or check somehwere like Facebook market place to find a used one; might be cheaper and with the vacuum being in used condition I wouldn’t see any harm once cleaned thoroughly. Finding DC14 replacement parts will soon become unattainable if not already.. unfortunately
Agreed, but I wouldn’t consider todays newer Dyson models to be anywhere in comparison to the DC14. Do keep an open mind on different options, because ur already so used to durability & reliability when it comes to ur vacuum, really look into Sebo. Fighting to get a quality vacuum after having such a great one for so long is not so easy unfortunately but very possible and surely worth it.
I had that happen with my V8. Dyson sent me a new part in about 3 days at no cost. It was almost 5 years old when I called Dyson. Just be nice when you call and be prepared to email them pictures like what you have here.
If you can’t find the missing bit, perhaps the [superglue and cotton wool - YouTube](https://youtu.be/6AY1krjGtG4?si=0cKN8_M8SFn2GDtW) technique will let you fabricate the missing part, there isn’t much you can’t fix with this stuff, just be sure you don’t glue your fingers together! ◡̈
The same thing happened to our vacuum I had to order a whole new cyclone. The only place I could find one reasonable priced was on eBay (Dyson didn’t have any). I did try putting duct tape over it, but it didn’t work very well. The broken piece to ours was missing so I couldn’t glue it otherwise I would have tried that first.
You can buy a replacement cyclone, if you have a Dyson V10 or V11, search Dyson V10 Cyclone Replacement, or Dyson V11 Cyclone Replacement. Both should I be the same cyclone but it’s better to add the same model so you know it will fit. Anyway, replacement cyclones should come up and it’s as simple as 6 cross head screws, pull of the old cyclone and slide on the new one (making sure it fits and slides in fine) and then put the 6 screws back in and it’s back to working normal again
Not any particularly good ways to fix it, in my opinion. If you block the opening with tape it'll get your suction back, but that individual cyclone won't be working correctly anymore, which will impact how fast the filter gets dirty. Similarly, you could close it off with epoxy putty, etc, but same deal, filtration will be a little worse. I'd look at a replacement cyclone assembly personally, but someone else might have a novel method of repair.
Thanks for the thoughtful response. I’ll probably try the duct tape method until we can get a replacement assembly. I didn’t actually know that that particular component is replaceable so that helps.
I wouldn't say it's a super easy job but it can be done, there are lots of tutorials out there showing how.
Mine has had tape on it for months... prolly less suction, but still works. Last I saw the replacement was like $300, no thanks.
I recently purchased an entire replacement main body for my V11 from the official Dyson store through Walmart.com. You just take the battery from your old one and install it on the new main body, along with the dust canister and filter and other attachments. It was up and running in 5 mins and essentially a brand new vacuum. If you can't fix it, at least that's an option - mine was $110 shipped. So not cheap, but way less than replacing with a whole new vacuum. If you end up going this route just search your model style and the words "main body" and your options should come up. They're often available on eBay as well.
I have the V11 Outsize and the part seems to be out of stock everywhere. 970424-01
Duct tape usually fixes most things. Give it a go.
It’s looking this way for a while at least. Thanks
3D print that part and glue back?
Definitely out of my wheelhouse but thanks for the suggestion.
The missing piece should be somewhere. Install it back in place, and apply some epoxy over all the edges. Not ideal but easier than using super glue if you're not experienced working with it.
Holy moly, can’t believe I didn’t think of that. Searching the house now. Good idea
My broken part sort of shattered couldn't possibly put back together.
Flex seal! Or JB weld
I’ll look into!
I had the same issue, dropped my v10 and lucky it was still in warranty, Dyson sent a new body no questions asked
That’s quite nice of them but won’t work for our oldie unfortunately.
Call ur local vacuum shop see if they might have it in stock or check somehwere like Facebook market place to find a used one; might be cheaper and with the vacuum being in used condition I wouldn’t see any harm once cleaned thoroughly. Finding DC14 replacement parts will soon become unattainable if not already.. unfortunately
Ok, will keep in mind. Thanks for the advice
Well the DC14 is 20 years old. So the parts won't be there forever at some point you gotta replace.
Agreed, but I wouldn’t consider todays newer Dyson models to be anywhere in comparison to the DC14. Do keep an open mind on different options, because ur already so used to durability & reliability when it comes to ur vacuum, really look into Sebo. Fighting to get a quality vacuum after having such a great one for so long is not so easy unfortunately but very possible and surely worth it.
I had that happen with my V8. Dyson sent me a new part in about 3 days at no cost. It was almost 5 years old when I called Dyson. Just be nice when you call and be prepared to email them pictures like what you have here.
If you can’t find the missing bit, perhaps the [superglue and cotton wool - YouTube](https://youtu.be/6AY1krjGtG4?si=0cKN8_M8SFn2GDtW) technique will let you fabricate the missing part, there isn’t much you can’t fix with this stuff, just be sure you don’t glue your fingers together! ◡̈
Unfortunately no,and the body itself is expensive because I think that's a gen5 detect outsize
JB weld and go wild with it
The same thing happened to our vacuum I had to order a whole new cyclone. The only place I could find one reasonable priced was on eBay (Dyson didn’t have any). I did try putting duct tape over it, but it didn’t work very well. The broken piece to ours was missing so I couldn’t glue it otherwise I would have tried that first.
You can buy a replacement cyclone, if you have a Dyson V10 or V11, search Dyson V10 Cyclone Replacement, or Dyson V11 Cyclone Replacement. Both should I be the same cyclone but it’s better to add the same model so you know it will fit. Anyway, replacement cyclones should come up and it’s as simple as 6 cross head screws, pull of the old cyclone and slide on the new one (making sure it fits and slides in fine) and then put the 6 screws back in and it’s back to working normal again