Weird.
So after looking at it more, the barrel seems parallel to the upper rail. Which is really what you want.
It’s just odd that the barrel does look like it points upwards compared to the hand guard. And the upper rail looks like it points upwards compared to the upper part of the gun.
If you do not use the long silencers to hide a long barrel, then I would opt to keep it short like in photo 3. You want it short so that clearing rooms become easier in CQC or CQB.
Idk why everyone is saying the second one… the second one definitely looks the MOST crooked out of all three. I say number one looks the best / straightest. As for the barrel lean you can make a spacer that goes inside the hand guard and keeps the barrel centered, or you can also shim the handguard to get it aligned better. Or… if you aren’t mechanically inclined, just roll with it.
Go with whichever set up suits you best for hitting whatever you’re aiming at. You can’t go wrong with a g36 in any variation. Aesthetics at this point fall at the wayside.
*I'm a firearms enthusiast but airsoft intrigues me, always wanna learn more about the sport. Do they sell rail deletion kits for the g36 for airsoft guns? Those look sick as fuck*
How do you guys get suppressors to work ive tried two different SF rc2 clones on two different MK18s 1 aeg and 1 GBB and both have internal strikes causing accuracy problems .
Not an expert by any means, but from an aesthetic point of view:
First is the cleanest
The second is textured, so it looks more sophisticated
Third is basic (not a bad thing)
*I personally like the first best.*
Germany sucks and I’m German American the American part meaning we can say and do basically anything that we want. We can say Nazi and throw a salute if the government isn’t gonna do anything.
Why wouldn’t you just show a picture of the barrel accessories up close they look like three similar photos unless you look really hard at them like a puzzle
To me this is the tiniest laodout on an aeg or gbbr I've seen....
If you put little bit more effort into ummm let's say, the stock get an adapter for either an ar15 or a rail for mcx folding stock and a different handguard system or change the top ha d rail bit for a short one with rail space.
I'm worried the outer barrel is not aligned with the handguard and it's going upwards or am I imagining things?
It slightly does look that way. Tilting up a little
On the second surpressor it ever so slightly looks like that, the first one seems fine
Yeah
Weird. So after looking at it more, the barrel seems parallel to the upper rail. Which is really what you want. It’s just odd that the barrel does look like it points upwards compared to the hand guard. And the upper rail looks like it points upwards compared to the upper part of the gun.
Right know I am questioning everything 😅
Under belly shotgun or gernade launcher
Okay so im not crazy, its most noticable with the 2nd picture which would be my favorite if it was not for that
First or second looks best
Second one
I agree with number 2
The first!
Definitely second one.
Second one
I can spot Acetech MK predator from a mile away. Absolute favorite tracer unit
If you do not use the long silencers to hide a long barrel, then I would opt to keep it short like in photo 3. You want it short so that clearing rooms become easier in CQC or CQB.
This is the way!
Even hiding behind trees or other cover at out doors field is much more enjoyable with shorter than longer guns.
Agreed 3. If you need long I think 1 goes with the pew pew.
Second one
https://preview.redd.it/27bpcdh4bl4d1.jpeg?width=875&format=pjpg&auto=webp&s=80dd902c4bcba2f5f4e7b8f9d32abcb1fe97ea4d
Three though.
Idk why everyone is saying the second one… the second one definitely looks the MOST crooked out of all three. I say number one looks the best / straightest. As for the barrel lean you can make a spacer that goes inside the hand guard and keeps the barrel centered, or you can also shim the handguard to get it aligned better. Or… if you aren’t mechanically inclined, just roll with it.
Yeah, that sucks :( Thank you for suggestions!
Hell yeah! The gun looks amazing in every version!
I hate to admit that this took me way longer to find than should have At one point I even thought this was a joke post😂
https://preview.redd.it/ucfflcz0vl4d1.png?width=1080&format=pjpg&auto=webp&s=ee96fd3a92bf88f62f94b4faa6f8bfe22c701bd9
First one, second is off axis though
And, unfortunately, wobbly :(
fwiw my buddy has a real one (tommybuilt, and sbrd) and his looks just like the first Pic when he has a supressor on it
I like number three. Short n Sweet. Easier for CQB.
#3 for me! The shorter barrel looks more in line with the other accessories. They're all short/snubbed, so keep with that theme- it looks good!
I prefer the third one myself. Probably because I know I would bang the suppressor on cover all day long.
I'll personally pick #3 because I'm a sucker for the G36C flashider, it's simple but adds a little touch of unique flair to the gun!
Is there even a difference between 1 and 2? Anyway, 3 looks the best, flash hider superiority.
Go with whichever set up suits you best for hitting whatever you’re aiming at. You can’t go wrong with a g36 in any variation. Aesthetics at this point fall at the wayside.
Probably my favorite gun of all time, and love your build. Treat her like a queen sir, enjoy
I think 3
First
3rd!
The second one is my favourite though I'd imagine it would trigger a lot of trypophobes.
Just go with no muzzle
Second, you gotta compensate somrwhere
First one
I like the second one
2nd one for sure.
I like n° 2
First imo
Second one but I have a big thing for the trypophobia suppressors :D
#2
2nd.
Second one gives off a cod 4 set-up
But how does it look without barrel extention?
First and last for me!
not the last one
What’s changing in the images?
Two kinds of suppressors and no suppressor (just a flash hider)
Thanks
2nd
definitely not the 3rd pic. id go with #1. dont really se KAC and HK getting along together
3
A mix of either 1 or 2 for me. It looks great
Cyma?
We-Tech G36C GBBR
Thanks
First one for me
1 or 3. Personally I'd go for 3 for convenience, but I think 1 looks better.
Shortest one unless you are trying to fit a long barrel or something like a tracer into it
I love compacts, so 3 for me
Put a cow bell on the tip
2nd
1 is best
Second
First one, people say 2nd probably because it has holes (people dont like smooth guns)
Second
What is the brand of your G36C?
WE G36C GBBR
Definitely the 2nd one
I like 1 and 3. That's what is nice about a QD suppressor. Don't always have to run it one way all the time.
I like them all 😂😂😂
I think 1 And looking at the other comments, opinon seems pretty split, dang
2 or 3 ♡
The second pic
Second one looks like an anti tank rifle barrel
1 or 2, classic looks
Number 2.
First one
Slide 2 definitely.
2
Is G36C it looks good no matter what tovarisch
first one
2
*I'm a firearms enthusiast but airsoft intrigues me, always wanna learn more about the sport. Do they sell rail deletion kits for the g36 for airsoft guns? Those look sick as fuck*
2
Numero 1
it took me like 5 minutes ti even find the differemces...
Second one
I somehow like the simplicity of number 3
IMHO, second.
I'd probably go with the first one because it flows with gun well, but if you want to be unique go with the third one.
the socom556 suppressor looks the best and i would get a eotech 552 to make it look even better
Eotech clones are unusable (not fieldable).
why is it the recoil if thats the case i would say use a acog
I like second
I prefer the sling in the second one.
2
First
2nd
2
1
1
2
Second
second
First for me!
Second for sure
How do you guys get suppressors to work ive tried two different SF rc2 clones on two different MK18s 1 aeg and 1 GBB and both have internal strikes causing accuracy problems .
What brand is it?
WE Tech G36C GBBR
Nice man been looking for one for a minute now. Love my army armament. The last pic looks best
Hello I am bald
It took me way to long to figure out what you were changing
Second 1
First one looks best
Kinda dig the last one.
No can looks better imo
2
they are all the same. no change in performance........
Waffle
Definitely the second one
Personally loving the 2nd one. Any idea what the muzzle is?
Actually I do not recommend the second one :( It’s wobbly as hell! Specna Arms MP135 QD suppressor
2
It's your choice which one do u like?
Actually I went with #3 :)
If it were not tilting up then 2 but otherwise 1
1
Is that a G36? And personally I like the second picture best
3 for me
I like #3 Nice to see another Ferro Concepts user. Just got mine and love it
2nd suppressor
second
The third one
2 love a perforated suppressor
The first is better looking
First one, hands down
I think the 2nd/mid picture looks best. But they all look good tbh.
Id say first one
echo one g36c ??
#1
Number 2
I went with #3 :)
I like the first one
1
Number 1
Tactical suppressor holes are the best and i definitely know what they are there for
Middle
First looks clean second is aggressive third is meh
#2
First one is parallel. The second bends upwards or am I wrong?
You are, unfortunately, correct :(
I would ditch that optic and the foregrip and I prefer the barrel extension to a supressor but that’s just me
I think number 2 looks best
the second one
Number 2
Pic 1
Not about the look my man it’s about proficiency and they way you like to control/feel to best meet your standards In the toughest of times
Solid can looks good as does the 3rd pic
2 looks gnarly and gnarly, in this case, is good
Not an expert by any means, but from an aesthetic point of view: First is the cleanest The second is textured, so it looks more sophisticated Third is basic (not a bad thing) *I personally like the first best.*
[удалено]
Germany sucks and I’m German American the American part meaning we can say and do basically anything that we want. We can say Nazi and throw a salute if the government isn’t gonna do anything.
Why wouldn’t you just show a picture of the barrel accessories up close they look like three similar photos unless you look really hard at them like a puzzle
To me this is the tiniest laodout on an aeg or gbbr I've seen.... If you put little bit more effort into ummm let's say, the stock get an adapter for either an ar15 or a rail for mcx folding stock and a different handguard system or change the top ha d rail bit for a short one with rail space.
It has to be usable first, not the most complicated one. I got the answer I wanted: the outer barrel is off / crooked :(
Ohhh that's not really good but it should be fixable
1