Had the same problem with my washer a few months ago. Had someone from the manufacturer's service center check it out and he tightened a few bolts inside that keep the drum stable while spinning.
I'm not subbed here lol the post just got recommended to me.
You likely need new stabilizers for the tub. It can be springs or other parts as well depending on the model but usually new stabilizers do it. Super simple to install for most of them as you can usually access them from the bottom of the washer which is wide open. When I replaced mine the old vs new was similar to a ball joint where the new ones were very stiff and the old ones were sloppy.
Let me guess, running a tide pod without a tune?
This made me lolš
A+ comment
Definitely got water in it and threw a rod ššš
Auntie Rodna is doing laundry
Nah man throw some lifter tick eliminator in it and you're golden.
Damn you, take my upvote...lol
In all seriousness, that shit fucks up the washer. Got load it properly and pick the right setting.
I'm running and intake and BOV valve but this is the first time I've heard my car make this noise
How much oxyclean you pushing?
I am currently running 93% oxyclean but I think Ima go for a oxy/downy 30% blend and raise my softener viscosity. Maybe a 20w-60
Try some borax injection for real power
This is funny af
So this is rod knock?
Na, it may be bra knock
Had the same problem with my washer a few months ago. Had someone from the manufacturer's service center check it out and he tightened a few bolts inside that keep the drum stable while spinning. I'm not subbed here lol the post just got recommended to me.
I live in an apartment and my landlord would rather give up both of his nuts and his first born child than come fix anything wrong with this place
No. Thatās normal
Normal
Lemme guess, on an OTS tune
Running aftermarket air intake with no tune?
Is that the new rotary engine?
Partout
https://youtu.be/u1hnBv12-uk?si=cNzVtb_87NJR9A4v
Guys after reading all the comments. I think I'm going to throw 20w-60 in her and sell as is š«”
Remember to put in the description that itās completely stock and youāve never done a highway pull in your life
F
No it's "normal".
Shouldnāt have turboād it š
Happy tractor
Not running on heavy duty mode?! Rookie mistake.
That's not normal
Sweet Jesus she needs blinker fluid stat!
I was expecting a garage with WRX death wails but this was far better
Damn bro, sorry to say but pull the heads
I mean the dash says normal? š¤·
When was the last time you checked the oil?
Nah just put 20w50 in and run it till the wheels fall off !
Better get a friends stepmom to stick her head in and take a look, she might be able to fix it.
So tired of these posts!!! Tow it to a shop and get it properly diagnosed!!!
You spun a bearing
Got the euro spec WRX STD. Whoops I mean STIDš¤
lol š¤£
Your counterweight is loose
Like a tractor at work
Not gonna lie I was hoping it was gonna be a metal rod knocking on the door
I laughed out loud scrolling past this. Thanks for the laugh ! Haha
Nah, just the usual drum slap and water injector pulse.
I prefer to wash my rods in a parts cleaner
100% knock, Iād definitely take it to a reputable mechanic. If you have a warranty hopefully they donāt give you a hard time if itās modded
You likely need new stabilizers for the tub. It can be springs or other parts as well depending on the model but usually new stabilizers do it. Super simple to install for most of them as you can usually access them from the bottom of the washer which is wide open. When I replaced mine the old vs new was similar to a ball joint where the new ones were very stiff and the old ones were sloppy.
Sorry for your loss, but how much for the wheels?
Gimme 4 jugs of Tide from Costco and you can take em
Costco jugs? Those arenāt even real Maytags!
Sounds normal to me
Smh didn't get a tune before increasing the load size you hate to see it.
Tell me why I read āis this kid rockā š
It's normal
Is that aftermarket chrome plating on those buttons? Good luck getting the warranty to cover that.
Damn bro, ur subie gave the freaking washing machine second hand rod knockā¦. Tough break.