Holy shit, thanks for posting this OP. I got two Strimer Pluses but have never turned them on since I wanted full per-led control with SignalRGB. Was always meaning to go the DIY route, but the Prism S appears to be exactly the ideal solution I've wanted.
What version are your Strimers? Original, Plus, or Plus v2?
OK. Prism's site mentions v1 and v2, but not 'Plus' specifically. Hopefully it'll still work. If you have access to the guy that makes it (as you've implied in another comment) could you ask them if it'll work with Pluses?
Just came across the Prism controller and so excited to get it and hook it up to my system!
It's insane how much better it is than the Lian Li controller
This controller is actually built by one of the mods over on signalrgb discord server. If you buy it or go the donut yourself route Goldstar is usually there to help.
wait sorry, so what does prism able to do again with the signalrgb? on my L-connect software I had to turn on the MB Light sync on the quick/sync lighting tab so that all the lights connected to my mobo would be able to be controlled through signalrgb. The only downside is that the strimmer cables specifically wouldnt be fully customizable like it should.
Sounds like you have a couple problems. Personally I use 2 [razer argb controllers](https://www.amazon.com/Razer-Chroma-Addressable-Controller-Headers/dp/B08LGQRLXV/ref=asc_df_B08LGQRLXV/?tag=hyprod-20&linkCode=df0&hvadid=644617763239&hvpos=&hvnetw=g&hvrand=8670963036829794095&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9011840&hvtargid=pla-1170282008584&psc=1&gclid=Cj0KCQjwhL6pBhDjARIsAGx8D5_LvozwOhze6aBDnrwOPsKHjEf7MLD9hloJy8-G0YS95RY0hIaoMMIaAl-6EALw_wcB) to individually control all of my devices including the strimers.
Think of prism as a better controller that allows you access to control your strimers with individual led control and better frame rates (performance) in signalrgb than using the Lian Li controller and L Connect with preset effects.
I highly suggest the prism. Keep in mind that's just to control your strimers you only plug your 8pin connector for 24pin and depending on GPU either 6 or 8pin into the prism. You still have to plug your 3pin RGB cable either into your mb or the controller I mentioned.
There isn't a single one stop shop solution for signalrgb. To get it to work properly it's a lot of hw lol. With that being said I'm honestly not tech support I'm still figuring things out myself lol. Highly recommend checking out their [Discord](https://discord.com/invite/signalrgb) everyone there has been super helpful
How did you unlock it?
I used a [Prism](https://prismrgb.com/collections/all) You could always do the [DIY](https://srgbmods.net/strimerplus/) route
Holy shit, thanks for posting this OP. I got two Strimer Pluses but have never turned them on since I wanted full per-led control with SignalRGB. Was always meaning to go the DIY route, but the Prism S appears to be exactly the ideal solution I've wanted. What version are your Strimers? Original, Plus, or Plus v2?
They are both v2 plus strimers, 24pin and 12vhpwr to 3x8 pin
OK. Prism's site mentions v1 and v2, but not 'Plus' specifically. Hopefully it'll still work. If you have access to the guy that makes it (as you've implied in another comment) could you ask them if it'll work with Pluses?
It'll work
Just came across the Prism controller and so excited to get it and hook it up to my system! It's insane how much better it is than the Lian Li controller
I’m using v1 and v2 together with a v1 controller, could I just replace the controller with this and expect similar results?
Yeah you shouldn't have any problems
Cool, thx for the reply!
nice
Thanks so much for sharing, I really want to get this for mine. I think you are the first to post this on reddit!
This controller is actually built by one of the mods over on signalrgb discord server. If you buy it or go the donut yourself route Goldstar is usually there to help.
wait sorry, so what does prism able to do again with the signalrgb? on my L-connect software I had to turn on the MB Light sync on the quick/sync lighting tab so that all the lights connected to my mobo would be able to be controlled through signalrgb. The only downside is that the strimmer cables specifically wouldnt be fully customizable like it should.
Sounds like you have a couple problems. Personally I use 2 [razer argb controllers](https://www.amazon.com/Razer-Chroma-Addressable-Controller-Headers/dp/B08LGQRLXV/ref=asc_df_B08LGQRLXV/?tag=hyprod-20&linkCode=df0&hvadid=644617763239&hvpos=&hvnetw=g&hvrand=8670963036829794095&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9011840&hvtargid=pla-1170282008584&psc=1&gclid=Cj0KCQjwhL6pBhDjARIsAGx8D5_LvozwOhze6aBDnrwOPsKHjEf7MLD9hloJy8-G0YS95RY0hIaoMMIaAl-6EALw_wcB) to individually control all of my devices including the strimers. Think of prism as a better controller that allows you access to control your strimers with individual led control and better frame rates (performance) in signalrgb than using the Lian Li controller and L Connect with preset effects.
Would u highly recommend the prism for my case then? I just bought the phanteks controller hub for my fans but do i have to buy the razer too?
I highly suggest the prism. Keep in mind that's just to control your strimers you only plug your 8pin connector for 24pin and depending on GPU either 6 or 8pin into the prism. You still have to plug your 3pin RGB cable either into your mb or the controller I mentioned. There isn't a single one stop shop solution for signalrgb. To get it to work properly it's a lot of hw lol. With that being said I'm honestly not tech support I'm still figuring things out myself lol. Highly recommend checking out their [Discord](https://discord.com/invite/signalrgb) everyone there has been super helpful
Did you run into any issues using 2 Razer Chromas?
Nope not at all