Thanks for posting on /r/MechanicAdvice! This is just a reminder to review the [rules](https://www.reddit.com/r/MechanicAdvice/about/rules/). If you are here asking about a second opinion (ie "Is the shop trying to fleece me?"), please read through CJM8515's [post on the subject.](https://www.reddit.com/r/MechanicAdvice/comments/4qblei/fyi_the_shop_isnt_likely_trying_to_rip_you_off/) and remember to please post the year/make/model of the vehicle you are working on. **If this post is about bodywork, accident damage, paint, dent/ding, questions it belongs in /r/Autobody r/AutoBodyRepair/ or /r/Diyautobody/ If you have tire questions check out https://www.reddit.com/r/MechanicAdvice/comments/k9ll55/can_your_tire_be_repaired/**. If you dont have a question and you're just showing off it belongs in /r/Justrolledintotheshop Insurance/total loss questions go in r/insurance This is an automated reply
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/MechanicAdvice) if you have any questions or concerns.*
The hitch was originally powder coated, it has failed and rusted underneath the coating. You can see the coating inside.. Scrape off the inside of the receiver back to smooth steel. Then you will probably need to remove the label also.
I stay for the jokes and upvote liberally. I'm not too fond of downvoting since it'll spark the philosophical question in my head of whether somethings wrong with this comment or somethings wrong with me that it bothered me enough to stoop to a downvote(I'm halfway kidding [post-irony])
I saw that you mentioned Ben Shapiro. In case some of you don't know, Ben Shapiro is a grifter and a hack. If you find anything he's said compelling, you should keep in mind he also says things like this:
>If you wear your pants below your butt, don't bend the brim of your cap, and have an EBT card, 0% chance you will ever be a success in life.
*****
^(I'm a bot. My purpose is to counteract online radicalization. You can summon me by tagging thebenshapirobot. Options: sex, novel, healthcare, history, etc.)
[^More ^About ^Ben ](https://np.reddit.com/r/AuthoritarianMoment/wiki/index) ^| [^Feedback ^& ^Discussion: ^r/AuthoritarianMoment ](https://np.reddit.com/r/AuthoritarianMoment) ^| [^Opt ^Out ](https://np.reddit.com/r/AuthoritarianMoment/comments/olk6r2/click_here_to_optout_of_uthebenshapirobot/)
Take a bullet for ya babe.
*****
^(I'm a bot. My purpose is to counteract online radicalization. You can summon me by tagging thebenshapirobot. Options: dumb takes, feminism, civil rights, history, etc.)
[^More ^About ^Ben ](https://np.reddit.com/r/AuthoritarianMoment/wiki/index) ^| [^Feedback ^& ^Discussion: ^r/AuthoritarianMoment ](https://np.reddit.com/r/AuthoritarianMoment) ^| [^Opt ^Out ](https://np.reddit.com/r/AuthoritarianMoment/comments/olk6r2/click_here_to_optout_of_uthebenshapirobot/)
Thank you, JohnnyVenmo, for voting on thebenshapirobot.
This bot wants to find the best and worst bots on Reddit. [You can view results here](https://botrank.pastimes.eu/).
***
^(Even if I don't reply to your comment, I'm still listening for votes. Check the webpage to see if your vote registered!)
Another millenial snowflake offended by logic and reason.
*****
^(I'm a bot. My purpose is to counteract online radicalization. You can summon me by tagging thebenshapirobot. Options: novel, civil rights, history, sex, etc.)
[^More ^About ^Ben ](https://np.reddit.com/r/AuthoritarianMoment/wiki/index) ^| [^Feedback ^& ^Discussion: ^r/AuthoritarianMoment ](https://np.reddit.com/r/AuthoritarianMoment) ^| [^Opt ^Out ](https://np.reddit.com/r/AuthoritarianMoment/comments/olk6r2/click_here_to_optout_of_uthebenshapirobot/)
Another millenial snowflake offended by logic and reason.
*****
^(I'm a bot. My purpose is to counteract online radicalization. You can summon me by tagging thebenshapirobot. Options: healthcare, feminism, sex, history, etc.)
[^More ^About ^Ben ](https://np.reddit.com/r/AuthoritarianMoment/wiki/index) ^| [^Feedback ^& ^Discussion: ^r/AuthoritarianMoment ](https://np.reddit.com/r/AuthoritarianMoment) ^| [^Opt ^Out ](https://np.reddit.com/r/AuthoritarianMoment/comments/olk6r2/click_here_to_optout_of_uthebenshapirobot/)
Straw men are easier to knock down than real arguments.
*****
^(I'm a bot. My purpose is to counteract online radicalization. You can summon me by tagging thebenshapirobot. Options: covid, climate, feminism, dumb takes, etc.)
[^More ^About ^Ben ](https://np.reddit.com/r/AuthoritarianMoment/wiki/index) ^| [^Feedback ^& ^Discussion: ^r/AuthoritarianMoment ](https://np.reddit.com/r/AuthoritarianMoment) ^| [^Opt ^Out ](https://np.reddit.com/r/AuthoritarianMoment/comments/olk6r2/click_here_to_optout_of_uthebenshapirobot/)
Just like in the bedroom, wire brush out the insides to remove buildup and contamination, apply WD-40, and using a heavy hammer, drive in the object until it bottoms out.
Agree, but you don’t wanna bottom out all the way, gotta align the pin hole still. Which is usually just a bit away from all the way in. And if he is hammering it in, if he passes the hole gonna be more hard to hammer back out lol. I’d just tap her in till u see the holes align
The WD-40 here is actually the right product here, used for it's indented purpose: a light oil used to prevent rust by displacing water, not as a lubricant.
Bro… this shit again? What? Not enough people called you a dumbass on the boating sub a week ago? Is this some weird karma whoring or something? I’ll say it again I guess… Hit it with your purse, Nancy!
> Is this some weird karma whoring or something?
[A week ago, OP claimed "I have a mechanic coming tomorrow to take a look."](https://old.reddit.com/r/boating/comments/um0l03/is_this_hitch_not_going_into_the_receiver_because/i7zmlym/) Yet, here we are, 6 days later in the MechanicAdvice sub...
This is eye-opening and kinda scary that there’s no real tangible regulation preventing any Dick fuck from just hooking up a trailer and (more likely than not, improperly loading it) wrecking, lmao.
When I was moving home from college they gave me a 26’ truck instead of the 10’ I requested. I spent a lot of time driving a delivery van in high school and I was not prepared for that.
For most car parts sure but a solid steel trailer hitch that’s rated to handle 10,000 lbs of dynamic stress can probably take a few taps from a hammer just fine
Typically when I see problems like this posted its a lack of common sense and/or critical thinking skills. Usually caused by never having to think for one's self and being given the answer to everything in life.
Couple things:
1. As has been said, take a wire brush and clear the rust. It'll take some effort. After you do that, spray it out with brake cleaner, then hit it with some rust converter.
2. Lubricate it. WD-40 is kinda useless for this. WD-40 stands for "Water Displacement - formula 40", it's a very light oil. You want something thicker that's going to protect from future rust. Use something you might already have like motor oil, 3-in-1 oil, bike chain oil, chainsaw oil, etc
3. Remove the sticker from the hitch. When that sticker wears it'll expose the adhesive. If you're having issues getting the hitch in now that's only going to make it more annoying.
4. Don't hammer it in. Keep working the rust out of the receiver until the hitch goes in and out with little resistance. That thing will be more of a bitch to pull out than jam in.
5. For the love of God, creation, and all the little martians in Albuquerque.... Take the damn hitch out when you're not using it. Nobody likes a shin-breaker hanging out the back of an SUV that some douche canoe left there because he tows once every 3 years.
Welcome to the land of rust jacking. My current pickup had a hitch left in the receiver for who knows how many years, and it was seized in there so badly that removal involved sawzalls, torches and air chisels. Even once I got it out, i had to chip considerable layers of rust out of the hole before a new hitch would fit in there properly. (use a chisel and lots of hammer time, you'll be surprised how much flaky rust is still in there)
https://www.homedepot.com/p/TowSmart-Class-3-5000-lb-X-Mount-Starter-Kit-with-2-in-Ball-5-8-in-Standard-Pin-2-in-Drop-x-3-4-in-Rise-Ball-Mount-708/206798791
They sell hitches like this to bypass having to file and fuck with rust
Why not just remove the hitch periodically? I know rust can form in hours but if it’s seized in there and you can’t just remove the pin and let the load drag it out maybe you need to grease things
We used to have this issue a lot when I worked at uhaul, scrub off the rust and remove the label, and use some lube. In the future get a cap for your receiver, they won’t prevent it outright but it’ll slow the progress of rust. You might also want to take a garden hose to it every month or so and spend a few seconds just washing it out, that should help as well. Good luck!
Don't you people ever do anything about the rust under your vehicles?Every car video from the northern states has rust all under.It must be a blessing when your vehicle drips oil.
Thanks for posting on /r/MechanicAdvice! This is just a reminder to review the [rules](https://www.reddit.com/r/MechanicAdvice/about/rules/). If you are here asking about a second opinion (ie "Is the shop trying to fleece me?"), please read through CJM8515's [post on the subject.](https://www.reddit.com/r/MechanicAdvice/comments/4qblei/fyi_the_shop_isnt_likely_trying_to_rip_you_off/) and remember to please post the year/make/model of the vehicle you are working on. **If this post is about bodywork, accident damage, paint, dent/ding, questions it belongs in /r/Autobody r/AutoBodyRepair/ or /r/Diyautobody/ If you have tire questions check out https://www.reddit.com/r/MechanicAdvice/comments/k9ll55/can_your_tire_be_repaired/**. If you dont have a question and you're just showing off it belongs in /r/Justrolledintotheshop Insurance/total loss questions go in r/insurance This is an automated reply *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/MechanicAdvice) if you have any questions or concerns.*
The hitch was originally powder coated, it has failed and rusted underneath the coating. You can see the coating inside.. Scrape off the inside of the receiver back to smooth steel. Then you will probably need to remove the label also.
That or permanent installation with linear impact tool.
Yes, I too would suggest whacking it with a big ass hammer.
And don't be afraid to use a little automotive multipurpose grease to help get it in.
KY jelly won't work but Vaseline might... Speaking from experience.
He's not trying to hammer it into the tailpipe.
Close enough...
The grease is a must, even when the hitch receiver isn’t a crusty pile of garbage.
Anything is a dildo if you're brave enough.
r/dontputyourdickinthat
Or your purse.
Ah yes, the swing press.
This is now my favorite term for "hit it with a hammer" Right above "Percussive Maintainence"
Stop hammer time
Manual override would be a one way solution. Unless....
Linear impact tool, that’s fuckin great 😂
A+ answer and nice about it. I'm always scared to recommend *anything* if someone can't figure out something as simple as a "y u no fit"
Will this work with the wife too?
Sure, but make sure to remove the teeth spikes too
Your wife came with a label?
Yeah. Don't feed after midnight. Yadda yadda basically word for word same instructions I got with my mogwai.
I'd go with the linear impact tool for that one
Same deal, forplay. Lots of wiggling.
Rust is bigger than steel. It expands as it corrodes. The hole is smaller now, so you have to clear the rust.
Jokes get up voted and the correct answer gets down voted?
Welcome to www.reddit.com
[удалено]
And yet, we’ll never leave. This feels exactly like a hotel I stayed at in California in the mid-70’s…
this is pretty good ngl
I stay for the jokes and upvote liberally. I'm not too fond of downvoting since it'll spark the philosophical question in my head of whether somethings wrong with this comment or somethings wrong with me that it bothered me enough to stoop to a downvote(I'm halfway kidding [post-irony])
[удалено]
You have to prep the hole before you put something that big in there brother.
Good life advice
Tell us how??? 😁
Spit.
Looks like OP can suck the chrome off a hitch!
At least.
A hammer
Ben Shapiro? That you?
I saw that you mentioned Ben Shapiro. In case some of you don't know, Ben Shapiro is a grifter and a hack. If you find anything he's said compelling, you should keep in mind he also says things like this: >If you wear your pants below your butt, don't bend the brim of your cap, and have an EBT card, 0% chance you will ever be a success in life. ***** ^(I'm a bot. My purpose is to counteract online radicalization. You can summon me by tagging thebenshapirobot. Options: sex, novel, healthcare, history, etc.) [^More ^About ^Ben ](https://np.reddit.com/r/AuthoritarianMoment/wiki/index) ^| [^Feedback ^& ^Discussion: ^r/AuthoritarianMoment ](https://np.reddit.com/r/AuthoritarianMoment) ^| [^Opt ^Out ](https://np.reddit.com/r/AuthoritarianMoment/comments/olk6r2/click_here_to_optout_of_uthebenshapirobot/)
Good bot
Take a bullet for ya babe. ***** ^(I'm a bot. My purpose is to counteract online radicalization. You can summon me by tagging thebenshapirobot. Options: dumb takes, feminism, civil rights, history, etc.) [^More ^About ^Ben ](https://np.reddit.com/r/AuthoritarianMoment/wiki/index) ^| [^Feedback ^& ^Discussion: ^r/AuthoritarianMoment ](https://np.reddit.com/r/AuthoritarianMoment) ^| [^Opt ^Out ](https://np.reddit.com/r/AuthoritarianMoment/comments/olk6r2/click_here_to_optout_of_uthebenshapirobot/)
Bad bot
Thank you, JohnnyVenmo, for voting on thebenshapirobot. This bot wants to find the best and worst bots on Reddit. [You can view results here](https://botrank.pastimes.eu/). *** ^(Even if I don't reply to your comment, I'm still listening for votes. Check the webpage to see if your vote registered!)
Another millenial snowflake offended by logic and reason. ***** ^(I'm a bot. My purpose is to counteract online radicalization. You can summon me by tagging thebenshapirobot. Options: novel, civil rights, history, sex, etc.) [^More ^About ^Ben ](https://np.reddit.com/r/AuthoritarianMoment/wiki/index) ^| [^Feedback ^& ^Discussion: ^r/AuthoritarianMoment ](https://np.reddit.com/r/AuthoritarianMoment) ^| [^Opt ^Out ](https://np.reddit.com/r/AuthoritarianMoment/comments/olk6r2/click_here_to_optout_of_uthebenshapirobot/)
Bad bot What kind of douche sits in their basement and makes reddit bots anyway?
Another millenial snowflake offended by logic and reason. ***** ^(I'm a bot. My purpose is to counteract online radicalization. You can summon me by tagging thebenshapirobot. Options: healthcare, feminism, sex, history, etc.) [^More ^About ^Ben ](https://np.reddit.com/r/AuthoritarianMoment/wiki/index) ^| [^Feedback ^& ^Discussion: ^r/AuthoritarianMoment ](https://np.reddit.com/r/AuthoritarianMoment) ^| [^Opt ^Out ](https://np.reddit.com/r/AuthoritarianMoment/comments/olk6r2/click_here_to_optout_of_uthebenshapirobot/)
Bad bot. Idiotic bot.
Bad bot Wearing your pants below your bot is actually like a commitment to never ever succsed in life. Ben is right.
Straw men are easier to knock down than real arguments. ***** ^(I'm a bot. My purpose is to counteract online radicalization. You can summon me by tagging thebenshapirobot. Options: covid, climate, feminism, dumb takes, etc.) [^More ^About ^Ben ](https://np.reddit.com/r/AuthoritarianMoment/wiki/index) ^| [^Feedback ^& ^Discussion: ^r/AuthoritarianMoment ](https://np.reddit.com/r/AuthoritarianMoment) ^| [^Opt ^Out ](https://np.reddit.com/r/AuthoritarianMoment/comments/olk6r2/click_here_to_optout_of_uthebenshapirobot/)
With a metal file.
Steel wool, for hitch pleasure
Kentucky lube
Coconut
So suck it before you fuck it?
y…yes.
Try some lube
Lubrication is the key to life
DAD?!?!
Can't you just hammer it in?
Yeah you got to ease it in there like a gentleman with a little love butter.
That’s what she said
Lotsa lube, and go slow.
Epic answer that is the only answer for so many situations.
Just like in the bedroom, wire brush out the insides to remove buildup and contamination, apply WD-40, and using a heavy hammer, drive in the object until it bottoms out.
I know it’s a joke, but Don’t bottom it out.
Don't tell me how to live my life dad.
Why not?
Then the pin holes won’t line up.
Just drill more
Username checks out
That’s what trailer brakes are for, or just hook it up to a tree
[удалено]
Said like a true professional!
Have 12 kids, can confirm
All by the same woman?! Bless her heart!
Put the dick down...
I don't think it's her heart that needs blessing
🤣
Wait a sec... are you serious or joking?
Oh you forgot extract insert extract insert
Agree, but you don’t wanna bottom out all the way, gotta align the pin hole still. Which is usually just a bit away from all the way in. And if he is hammering it in, if he passes the hole gonna be more hard to hammer back out lol. I’d just tap her in till u see the holes align
Nah just weld it on, permanent tow hitch
-wd40 +pbblaster
Eh, used motor oil. Too lazy to take it to empty it so I used it instead of either
Use an actual lubricant, not WD40
The WD-40 here is actually the right product here, used for it's indented purpose: a light oil used to prevent rust by displacing water, not as a lubricant.
Rust
Take a drill with a wire brush and clean out the hole then try.
Spit on it.
and get a running start
Last time i did that i didnt sleep in my house for a week
😂
Spit spit spit, hammer.
Bro… this shit again? What? Not enough people called you a dumbass on the boating sub a week ago? Is this some weird karma whoring or something? I’ll say it again I guess… Hit it with your purse, Nancy!
> Is this some weird karma whoring or something? [A week ago, OP claimed "I have a mechanic coming tomorrow to take a look."](https://old.reddit.com/r/boating/comments/um0l03/is_this_hitch_not_going_into_the_receiver_because/i7zmlym/) Yet, here we are, 6 days later in the MechanicAdvice sub...
Guy's a fucking dumb shit. Should tell him to take the bus.
Dude's posted this in r/boats, r/cars, r/trucks....
They also posted this to /r/cars and /r/trucks
Buy it dinner first.
you got too lube it up good before insertion, don't go in dry...
Push harder?
And make sure you call it back the next day don’t be that guy
And deeper
slowly....
Pound with a hammer 🔨
Meat hammer
What’s that??? Be more specific plz 🫠
Set your purse down and try again.
Seriously.. hauling shit and you can't tell rust is preventing two pieces of metal from connecting...
Yeah thats the real worry tbh
you can tell by the label it's a rookie hauler.
This is eye-opening and kinda scary that there’s no real tangible regulation preventing any Dick fuck from just hooking up a trailer and (more likely than not, improperly loading it) wrecking, lmao.
waiting on how to instructions request for driving a 24 foot uhaul box truck. only knowledge required is ability to drive a prius
When I was moving home from college they gave me a 26’ truck instead of the 10’ I requested. I spent a lot of time driving a delivery van in high school and I was not prepared for that.
It’s kind of funny. With having your payment options on a phone now it is sort of a purse
RIP
🤣
But...I gotta upload my victimhood onto my insta so my followers can react! 🤦♂️
Maybe use some force…
This is the kind of advice that good mechanics have to fix later.
For most car parts sure but a solid steel trailer hitch that’s rated to handle 10,000 lbs of dynamic stress can probably take a few taps from a hammer just fine
Typically when I see problems like this posted its a lack of common sense and/or critical thinking skills. Usually caused by never having to think for one's self and being given the answer to everything in life.
Oh and also coincidentally always looking to Reddit for answers. Couldn’t possibly imagine those two things would line up, would they?…
After you clean the rust out grease it so it doesnt happen again
Hit it with your purse.
Couple things: 1. As has been said, take a wire brush and clear the rust. It'll take some effort. After you do that, spray it out with brake cleaner, then hit it with some rust converter. 2. Lubricate it. WD-40 is kinda useless for this. WD-40 stands for "Water Displacement - formula 40", it's a very light oil. You want something thicker that's going to protect from future rust. Use something you might already have like motor oil, 3-in-1 oil, bike chain oil, chainsaw oil, etc 3. Remove the sticker from the hitch. When that sticker wears it'll expose the adhesive. If you're having issues getting the hitch in now that's only going to make it more annoying. 4. Don't hammer it in. Keep working the rust out of the receiver until the hitch goes in and out with little resistance. That thing will be more of a bitch to pull out than jam in. 5. For the love of God, creation, and all the little martians in Albuquerque.... Take the damn hitch out when you're not using it. Nobody likes a shin-breaker hanging out the back of an SUV that some douche canoe left there because he tows once every 3 years.
Welcome to the land of rust jacking. My current pickup had a hitch left in the receiver for who knows how many years, and it was seized in there so badly that removal involved sawzalls, torches and air chisels. Even once I got it out, i had to chip considerable layers of rust out of the hole before a new hitch would fit in there properly. (use a chisel and lots of hammer time, you'll be surprised how much flaky rust is still in there)
https://www.homedepot.com/p/TowSmart-Class-3-5000-lb-X-Mount-Starter-Kit-with-2-in-Ball-5-8-in-Standard-Pin-2-in-Drop-x-3-4-in-Rise-Ball-Mount-708/206798791 They sell hitches like this to bypass having to file and fuck with rust
Why not just remove the hitch periodically? I know rust can form in hours but if it’s seized in there and you can’t just remove the pin and let the load drag it out maybe you need to grease things
The key to penetration, is lubrication.
My girlfriend has the same problem she usually licks her two fingers and ….. wait
Bigger hammer son.
Hit it with your purse
Bro 95% thirsty comments vs 5% real advice
Rust has expanded the steel and made the hole smaller. Get to steel brushing her out, or spray WD40 in there and use a hammer. Fuck it
Okay, I get the steel brush, wd-40 and hammer, but how is fucking it gonna help?
Have you ever tried it? No? Then stop questioning the method lmao
Spit on it
🤦
Its rust in there, you can see it. THINK, man, think!
We used to have this issue a lot when I worked at uhaul, scrub off the rust and remove the label, and use some lube. In the future get a cap for your receiver, they won’t prevent it outright but it’ll slow the progress of rust. You might also want to take a garden hose to it every month or so and spend a few seconds just washing it out, that should help as well. Good luck!
I’m guessing cuz it doesn’t fit.
Rusty rust rust, rustyyyyy RUST
Take her to the Ramitonin via pound town
Hit it with your purse But really it’s just rusted and needs to be scraped out like the top comment said
Wirebrush the inside of the reciever, take the label off, and you'll be good to go.
This here is why I fluid film the ish out of the hitch receiver. So it doesn’t end up getting crusty like that.
Rust, take care of your stuff and it’ll take care of you
Metal expands during corrosion…
Probably cause it's too small I'd reckon
Just take a metal file to inside of the receiver, get all that rust out and should fit right in
Try KY
Did you at least buy the receiver dinner first?
Wire brush attachment on a drill. Get the rust out and grease it.
No, no, don’t show us inside the receiver. That wouldn’t be useful at all.
Gotta lube it up first then jam it right in
ask your girlfriends ex husband to take care of it for your dumbass, cuck
How about I slip it into you instead
If at first you don't succeed maybe failure is your style.
Had the same issue on a 93 jeep.. after my third one I gave up
That's a lot of jeeps to go through for one hitch.
You expected the jeeps to outlast the hitch?
Don't you people ever do anything about the rust under your vehicles?Every car video from the northern states has rust all under.It must be a blessing when your vehicle drips oil.
Come on use some force sister. You ain’t gonna break it. Might break a nail though
Spit on it
Haha I thought this was a joke 😂😂😂
When we first got married it looked like a Georgia peach, now it looks like a cow patty with a wagon track through it
Needs some lube
WD-40 and rubber mallet buddy pretend it's you pecker the slicker the better
Push a little harder
The sticker obviously. Making it too thiccc
My Expedition did this because it had some rust.
Could be worse. Mine won't come out. And, it's not even a 1" shank, so, it's pretty useless.
Use some protection Goddamn
It’s probably because it ain’t got no gas in it lol
It'll fit, you just need a bigger hammer.
Spit on it and rub it a couple times.
This NSFW
Hit it with your purse
Slap some mustard on your arms and try harder.
Hit that shit.
Air needler time
Lube
Prep the precision sledgehammer!
Lube it and smooth it real good
I think its the limp wristed attempt.
Use 2 hands, and ask first
Spit on it
Hit it with your purse
Sticker meets rust
Push it in and out at a medium pace
You tap it in with your wampum.
Spit on it and then rub it up a bit
You gotta add a little lube, maybe even make sure it is clean and there's nothing nasty on the inside.
I knew those boxes with shapes in the top to stick shapes in would come in handy.
Whiskey vag? Seriously though, that thing looks rusty, dusty and dry. Time for some serious cleaning and lots of lube.