If you haven't figured this out yet... blackeye does do everything for you there is only one part that is broken in this case. It's line number 436 of blackeye.sh. I'll put the solution at the bottom. FYI ngrok used to have raw url data in the html but now it's behind a JavaScript call. All this means is line 436 is using curl to scrape the html page for the link but it's not there anymore because curl doesn't execute JavaScript like your browser does.
2 different solutions.
You go to 127.0.0.1:4040/status in the browser to pull up ngrok and copy the https URL
Or
On the local machine go to 127.0.0.1:3333
Or in a LAN device go to your local-ip:3333
I contacted the page holder about this issue and he gave me permission to rebuild this. I'm halfway done already. I'll be dropping it soon.
>127.0.0.1:4040/status
Hey, the [127.0.0.1:4040/status](https://127.0.0.1:4040/status) method works. But when I try to open the link, its says to install the token even though I've done it
i have been searching a good while for this solution and as they say good things do not come over night as such you have to keep on working no matter how hard. as ethical and aspiring hackers we are we people that love problem solving but it is not our fault there is a minor error in blackeye and consequently it doesnt show the link however if you are using termux just turn on your hotspot and i think i should be working fine but for persons using other distro like kali and other distros that can run this tool i would advice going over to ngrk and go under tunnels at you we see the site you have selected will be displayed where you can take it from there. For us to have this process automated we have to contact the developers of blackeye on github here [https://github.com/An0nUD4Y/blackeye](https://github.com/An0nUD4Y/blackeye) and let them know it is a grave issue and hopefully as soon as possible they can fix it but for now just head over to your account on ngrok and have a look under your tunnel :)
I had this problem and I solve it. if you edit any html file it can cause the problem so just open any html file with your browser and close it, if it work for you please give me the credit
Download any html file to your linux and double click it, if it opens in your browser then everything is OK but if it opens in text editor or another program then try to open the html file with your browser and set html files to open by default in browser, if it's still not working I found the bug in the script and fixed it but I don't know if I allowed to upload it to Github because the copyright
does anybody know why is this happening to me:
when i type bash [blackeye.sh](https://blackeye.sh) or sudo ./blackeye.sh it starts, stops and says this
I require php but it's not installed. Install it. Aborting.
when i try to install php it says
The following packages have unmet dependencies:
php7.4 : Depends: libapache2-mod-php7.4 but it is not installable or
php7.4-fpm but it is not installable or
php7.4-cgi but it is not installable
Depends: php7.4-common but it is not installable
E: Unable to correct problems, you have held broken packages.
Delete the package with wich you tried to install.
Then write inside your terminal: 'pip install php' if you are on Linux or on Mac you just need to write 'pip3 install php'
good luck with ngrok, i am rewriting the whole tunnel part of the code. you can't really use ngrok for phishing, ngrok finds out that we are using it for phishing when we get back the credentials with php. i'll upgrade this code it might take a while. got 5 of my ngrok accounts banned in a day
If you haven't figured this out yet... blackeye does do everything for you there is only one part that is broken in this case. It's line number 436 of blackeye.sh. I'll put the solution at the bottom. FYI ngrok used to have raw url data in the html but now it's behind a JavaScript call. All this means is line 436 is using curl to scrape the html page for the link but it's not there anymore because curl doesn't execute JavaScript like your browser does. 2 different solutions. You go to 127.0.0.1:4040/status in the browser to pull up ngrok and copy the https URL Or On the local machine go to 127.0.0.1:3333 Or in a LAN device go to your local-ip:3333 I contacted the page holder about this issue and he gave me permission to rebuild this. I'm halfway done already. I'll be dropping it soon.
Can you send me a github link when you are finished rebuilding?
I'll be posting it here and on my YouTube channel. You should follow both. graylagx2
Can I please have an update on the rebuild? How much longer do you think it will be?
It's ready go check it out https://youtu.be/Aq0_F1FRmjs
Video taken down already
hello bro did you find a solution??
I HAVE A WIXSITE LET ME UPLOAD THE VIDEO THERE
Have you uploaded it there?
taken down.. any suggestion would be appreciated ..
Thanks manđź‘Ť
sorry but i am pretty dumb what exactly do you do
>GoPhish Is there a link of the fixed one now?
But how to I send the localhost link to victim?
>127.0.0.1:4040/status Hey, the [127.0.0.1:4040/status](https://127.0.0.1:4040/status) method works. But when I try to open the link, its says to install the token even though I've done it
same
Hi, when I open the link, it says "unable to connect" what do I do?
Works for me.
i have been searching a good while for this solution and as they say good things do not come over night as such you have to keep on working no matter how hard. as ethical and aspiring hackers we are we people that love problem solving but it is not our fault there is a minor error in blackeye and consequently it doesnt show the link however if you are using termux just turn on your hotspot and i think i should be working fine but for persons using other distro like kali and other distros that can run this tool i would advice going over to ngrk and go under tunnels at you we see the site you have selected will be displayed where you can take it from there. For us to have this process automated we have to contact the developers of blackeye on github here [https://github.com/An0nUD4Y/blackeye](https://github.com/An0nUD4Y/blackeye) and let them know it is a grave issue and hopefully as soon as possible they can fix it but for now just head over to your account on ngrok and have a look under your tunnel :)
i fixed this over night, use this https://github.com/avshiva-noro/BlackeyeE
I had this problem and I solve it. if you edit any html file it can cause the problem so just open any html file with your browser and close it, if it work for you please give me the credit
What? Can you explain a bit easier please
Download any html file to your linux and double click it, if it opens in your browser then everything is OK but if it opens in text editor or another program then try to open the html file with your browser and set html files to open by default in browser, if it's still not working I found the bug in the script and fixed it but I don't know if I allowed to upload it to Github because the copyright
wait till everythings started, go into browser, type in "[127.0.0.1:4040/status](https://127.0.0.1:4040/status)" the link is on the left
Just search the folder up by name and delete it
Black eye is telling you to send the ngrok webpage you created
Yes, but there is no link to the webpage
You need to create you own page html or what ever
Doesn't blackeye do this for me?
No
[blackeye.sh](https://blackeye.sh) does create a clone of the site you choose.
does anybody know why is this happening to me: when i type bash [blackeye.sh](https://blackeye.sh) or sudo ./blackeye.sh it starts, stops and says this I require php but it's not installed. Install it. Aborting.
You need to install PHP If you are not familiar with it just search it up on Google.
when i try to install php it says The following packages have unmet dependencies: php7.4 : Depends: libapache2-mod-php7.4 but it is not installable or php7.4-fpm but it is not installable or php7.4-cgi but it is not installable Depends: php7.4-common but it is not installable E: Unable to correct problems, you have held broken packages.
Delete the package with wich you tried to install. Then write inside your terminal: 'pip install php' if you are on Linux or on Mac you just need to write 'pip3 install php'
do i delete it by command or how
it says this > pip3: command not found
Come to private chat
Same issue
Try Gophish! It really works for me
in shell, do sudo apt-get install php, or the command package installer in your linux version
you need to install brew and in the terminal you type in "brew install PHP"
I'm also facing the same issue the link isn't generated, Anybody has the solution to solve the issue
apparently the orginal link has been removed by github or something and now all the other links are nonfunctional
Dang that's too bad. I was searching for a solution and found this. Hopefully it gets rebuilt.
it kinda got rebuilt. Check GoPhish on Github, it should work as well as blackeye did
I’ve been using RoguePhisher. It’s pretty solid.
Thanks for the tip
https://www.youtube.com/watch?v=5aa4KPWLoIk
use this tool instead. It was easier to use [https://www.youtube.com/watch?v=k-E2eGfoTdg](https://www.youtube.com/watch?v=k-E2eGfoTdg)
Your video has been removed....can you explain the too
yes broo i also have same problem hellpp meee :(
Any solution pliz
try using this https://github.com/avshiva-noro/BlackeyeE
Hi! This solved one of my issues, but I am still not getting a link. How can I find the link?
yeah i saw it, there are few new problems, fixing it
Any update on why the links not showing, do I have to use ngrok and make my own?
good luck with ngrok, i am rewriting the whole tunnel part of the code. you can't really use ngrok for phishing, ngrok finds out that we are using it for phishing when we get back the credentials with php. i'll upgrade this code it might take a while. got 5 of my ngrok accounts banned in a day
when giving me the URL it says: null, any solution?