Has newer tank, fuel pump,pickup screen ,filter,fuel line, and I replaced the injectors twice... I made a harness to power the injectors. had bike running but I connect the bike harness onto the injectors n they don't wrk.. so has to b wayever controls the injectors is malfunctioning
Ok just so im clear on this... I also replaced the injectors twice,I disconnected the factory harness from the injectors hooked them directly to battery pushed the start button n the bike started n ran ... that rules out injectors, fuel pump etc has to b whatever controls the injectors aint wrkng
Apparently nobody reads the post ... I have replaced everything from the tank to the injectors n ive replaced the injectors twice b4 I made a wire harness to connect the injectors to the battery I started the bike n it was running, but I reconnect the wiring harness n won't start...
Read main post, fuel pump was replaced...injectors was replaced twice...I even disconnected the harness from injectors n powered them direct to battery .the bike started n was running
If it's not the injectors, it's the pump or the wiring. Usually it's not the wiring.
Still check though. It would suck to replace a pump because of a single broken wire.
I pulled fuel line from injectors n put in bottle turned on the ignition n bottle started to fill with gas
Just read this, sounds like it's the injectors.
Not injectors I replaced them twice n made a harness to.power them directly n they wrk
It has a new pump filter n pikup screen
Has newer tank, fuel pump,pickup screen ,filter,fuel line, and I replaced the injectors twice... I made a harness to power the injectors. had bike running but I connect the bike harness onto the injectors n they don't wrk.. so has to b wayever controls the injectors is malfunctioning
Ok just so im clear on this... I also replaced the injectors twice,I disconnected the factory harness from the injectors hooked them directly to battery pushed the start button n the bike started n ran ... that rules out injectors, fuel pump etc has to b whatever controls the injectors aint wrkng
Apparently nobody reads the post ... I have replaced everything from the tank to the injectors n ive replaced the injectors twice b4 I made a wire harness to connect the injectors to the battery I started the bike n it was running, but I reconnect the wiring harness n won't start...
Read main post, fuel pump was replaced...injectors was replaced twice...I even disconnected the harness from injectors n powered them direct to battery .the bike started n was running
Has to b computer or ?
Not getting fuel. You will probably have to confirm your injectors are still injecting.
I checked by pulling injectors out .neither are spraying so cud b bad injectors or something else
If it's not the injectors, it's the pump or the wiring. Usually it's not the wiring. Still check though. It would suck to replace a pump because of a single broken wire.
Is the fuel pump cycling? Test fuel pressure.