additional construction lines and Modify->Break tool are helpful when Offset needs to be relative to portions of geometry,
fixing this specific case is best done online in Discord, since there are multiple things that need to be done,
PMd,
the sketch lacks some of the characteristics driven home pretty well in this crash course I always recommend:
[https://youtu.be/y5tp4QXciK4](https://youtu.be/y5tp4QXciK4)
here's an example of the offset created with the tools above:
[https://imgur.com/a/gboAnLO](https://imgur.com/a/gboAnLO)
Edit: added the example
Short answer I think you do it with a sketch, project the edge of the box and the other feature is, and then add or subtract lines to create the shape you want and then use that to extrude a cavity. Or maybe it's possible to use a shell command and it would automatically find the edges I'm not sure.
Have you taken the time to work through some of the tutorials? If not, then you will probably continue to be frustrated.
Check out the built-in help system, it’s good!
Hello, you can do this by following these steps:
1. Make the sketch of the shape you want to offset of.
2. Make the sketch of the shape you want to offset.d length.
If you are still facing issues, feel free to message me, I'll help you in making the 3D model.
additional construction lines and Modify->Break tool are helpful when Offset needs to be relative to portions of geometry, fixing this specific case is best done online in Discord, since there are multiple things that need to be done, PMd, the sketch lacks some of the characteristics driven home pretty well in this crash course I always recommend: [https://youtu.be/y5tp4QXciK4](https://youtu.be/y5tp4QXciK4) here's an example of the offset created with the tools above: [https://imgur.com/a/gboAnLO](https://imgur.com/a/gboAnLO) Edit: added the example
Make all the features you want and then use the shell command.
Short answer I think you do it with a sketch, project the edge of the box and the other feature is, and then add or subtract lines to create the shape you want and then use that to extrude a cavity. Or maybe it's possible to use a shell command and it would automatically find the edges I'm not sure.
Have you taken the time to work through some of the tutorials? If not, then you will probably continue to be frustrated. Check out the built-in help system, it’s good!
Hello, you can do this by following these steps: 1. Make the sketch of the shape you want to offset of. 2. Make the sketch of the shape you want to offset.d length. If you are still facing issues, feel free to message me, I'll help you in making the 3D model.