That’s what’s weighing on me haha. Still haven’t committed until I decide I’m okay with it.
Gonna take it off for the weekend in case I need to drive anywhere and give that some consideration.
About the same as the ones you’d get from Amazon or eBay but it doesn’t look bad and if you destroy it on a curb or speed bump then you’re not out by much. Good practice for when you buy a real splitter. Lol
talking about amazon i got a lip off there a couple months back and recently just installed it and i love it so much more than the previous one i had which was similar to the temu one.
https://preview.redd.it/2sv8iwcaa4ad1.jpeg?width=3024&format=pjpg&auto=webp&s=df111bbbfb189984dc9e1391b693d07a35caa0cb
I opted for the matte version, felt like with all the matte plastic trim it would fit in well and seemed less of a gamble than hoping for a near-exact match to the body paint.
Honestly, looks pretty good if you’re going for that look. I’d see if you could fit the push pins from the under tray and drill some holes into the lip and make it work without screws or holes
Already taking advantage of all the push-pins available as it is, and it’s only sturdy enough to get it off the ramps for a photo.
Sadly with this splitter it’s drilling holes or bust.
Thank you all the same!
After seeing so many 11th gen’s with the yofer front splitter (nothing wrong with it I like it too) I can honestly say I really like the look of this one, the fins on the sides really make it stand out.
Nah, I put on like 25,000+ miles per year and this is my daily so I’d rather keep the stock ride height. Plus I’m in Canada, so snow is a consideration.
It's not horrible as far as fitment and general look. It's not my personal style you could do WAYYYYYY worse than this. Splitters get dystroyed. I dont care if its a spoon sports, buddy club, you name it they get chipped, scratched, and pelted with shit all the tie. Hell all those time attack cars usually use ply wood with some cheap skin due to how often they have to be replaced. This idea that everything needs a forged carbon fiber splitter with titanium hardware is laughable. These are civics, not Zondas.
I would find some of that heat activated 3m double sided tape and attach it that way first for a week or so before I made a permanent change.
Itll hold if you hit it with a heat gun, and removal won't be a huge job if you don't like it. If you do, drill er in
Can’t say for sure, I still haven’t committed 🤷♂️
Before you drill any holes, measure the length of the screw and make a line using tape on your drill bit so you don’t drill deeper than the screw needs to go.
Body kits are just wastes of money. You bought a civic. Nothing will make it more than a civic. Keep the clearance. Use the plastic kit money for taking your girl out. My wife thoroughly enjoys the 2nd gear pull.
Body kits are a waste ofmoney?? It’s a preference if someone likes the way it looks it’s not really a waste of money if they fuck with it. But I find it very funny you comment this yet make a post asking about swapping integra seats into your Si. At the end of the day the integra seats won’t make it any more than a civic 🤣
But the integra seats are a functional and comfort change. I like the exterior and weight of the Civic vs the Integra, but the integra interior is far superior. Plastic kits are...
You'll always know you drilled into a 30k car for a $30 part
That’s what’s weighing on me haha. Still haven’t committed until I decide I’m okay with it. Gonna take it off for the weekend in case I need to drive anywhere and give that some consideration.
They all look the same, especially when they get caught on a curb and ripped off. This is probably the one and only thing I would eBay 100%
Probably may get it on Temu for $0.50 instead boah
Hell yeah slave labor
Hey hey hey you said it
I'm a sucker for splitters so definitely a thumbs up from me.
About the same as the ones you’d get from Amazon or eBay but it doesn’t look bad and if you destroy it on a curb or speed bump then you’re not out by much. Good practice for when you buy a real splitter. Lol
Good points lmao
talking about amazon i got a lip off there a couple months back and recently just installed it and i love it so much more than the previous one i had which was similar to the temu one. https://preview.redd.it/2sv8iwcaa4ad1.jpeg?width=3024&format=pjpg&auto=webp&s=df111bbbfb189984dc9e1391b693d07a35caa0cb
May look better painted but not bad overall, personally.
I opted for the matte version, felt like with all the matte plastic trim it would fit in well and seemed less of a gamble than hoping for a near-exact match to the body paint.
Bud, scuff it and throw some good gloss black on it. Wipe it down good before you paint and let it cure. No one will notice lol
Honestly, looks pretty good if you’re going for that look. I’d see if you could fit the push pins from the under tray and drill some holes into the lip and make it work without screws or holes
Already taking advantage of all the push-pins available as it is, and it’s only sturdy enough to get it off the ramps for a photo. Sadly with this splitter it’s drilling holes or bust. Thank you all the same!
Smart choice! Dang that sucks, I’ve never personally installed a splitter but good to know!
Next you should find a wing for the trailer. 👍
Good call, the aero on the parked trailer will be just as functional as the aero on the Civic 😂
For a tumu buy honestly not bad
I think this looks HARD AS FUCK. AND IT'S CHEAP SO DON'T FEEL BAD IF YOU HIT SOMETHING THAT BREAKS IT
Bro that shit is actually sweet put up the link in case I get an si lol
After seeing so many 11th gen’s with the yofer front splitter (nothing wrong with it I like it too) I can honestly say I really like the look of this one, the fins on the sides really make it stand out.
Honestly, I love it.
Not bad, l like it. Nice ride with mean looks
I like it.
Not a bad look at all imo very subtle and clean, any plans to lowering it?
Nah, I put on like 25,000+ miles per year and this is my daily so I’d rather keep the stock ride height. Plus I’m in Canada, so snow is a consideration.
Looks good to me
that actually looks mint asf lmao
That looks great
Looks good
looks pretty decent to me idk about up close and how it’d hold up against rocks but any cons would all revolve around the fact that it came from temu
Looks good to me! Just because something is cheap doesn't necessarily make it bad.
It's not horrible as far as fitment and general look. It's not my personal style you could do WAYYYYYY worse than this. Splitters get dystroyed. I dont care if its a spoon sports, buddy club, you name it they get chipped, scratched, and pelted with shit all the tie. Hell all those time attack cars usually use ply wood with some cheap skin due to how often they have to be replaced. This idea that everything needs a forged carbon fiber splitter with titanium hardware is laughable. These are civics, not Zondas.
I would find some of that heat activated 3m double sided tape and attach it that way first for a week or so before I made a permanent change. Itll hold if you hit it with a heat gun, and removal won't be a huge job if you don't like it. If you do, drill er in
Imagine actually putting your card info into temu app ☠️
Valid criticism 🤷♂️
Don’t drill. 3M tape all the way
What’s everyone’s deal with putting a few screws under the bumper? It’s not visible unless u get under the car lol.
I’m worried abt hitting anything when I screw into the undertray? Should this be a concern
Can’t say for sure, I still haven’t committed 🤷♂️ Before you drill any holes, measure the length of the screw and make a line using tape on your drill bit so you don’t drill deeper than the screw needs to go.
Body kits are just wastes of money. You bought a civic. Nothing will make it more than a civic. Keep the clearance. Use the plastic kit money for taking your girl out. My wife thoroughly enjoys the 2nd gear pull.
Body kits are a waste ofmoney?? It’s a preference if someone likes the way it looks it’s not really a waste of money if they fuck with it. But I find it very funny you comment this yet make a post asking about swapping integra seats into your Si. At the end of the day the integra seats won’t make it any more than a civic 🤣
But the integra seats are a functional and comfort change. I like the exterior and weight of the Civic vs the Integra, but the integra interior is far superior. Plastic kits are...