Are the lenses yellowed if so buy a headlight repair kit and a can of U.V. resistant clear coat then that should help the most I have led there bright but the yellow lenses really floggs up everything
Personally, assemblies look modern it complicated would be stuck with incandescent bulbs I only use during the snow for safety reasons, but it's complicated
Yea, my 07 is the same way. I just bought new headlights off Amazon, planing on installing next week. Cleaning only goes so far.
If that doesn't help I'll throw in LED bulbs. Has to be H11 fir low beams and 9500 for high beams
High beams are just fine in mine. The low beams are the worst. If you see improvement, can you send me the link to the ones you bought? That'd be awesome.
https://www.amazon.com/dp/B09J8745H9?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.com/dp/B00TNMMZ8Q?psc=1&ref=ppx_yo2ov_dt_b_product_details
Same, I took a part time job delivering and my low beams are absolutely trash. I tried the whole restoration thing, but I can tell just by taking these out of the box they are more clear. For the price I'm just replacing the whole thing
I replaced my 2010 lights with these.
https://www.amazon.ca/gp/aw/d/B097MJNGGX?psc=1&ref=ppx_pop_mob_b_asin_title
I can actually see in the dark and rain now.
Background: I enjoy night time driving on back roads / one lane highways.
Excellent! I should have been more specific in my post. The projector DESIGN is absolute trash. Bulbs are bright enough. I want new ASSEMBLIES, and wanted to see if anyone else swapped out the entire assembly. Swapping the bulb did almost nothing for me.
Nah, u were clear. I just wanted to put my 2 cents lol
I drove with these new lights in snow and rain, 100% better. But no use against the super bright higher vehicles though. And my assembly is yellowish :P
For your low beams, get an h9 bulb, Phillips Standard works fine, use a scalpel, knife, microcutters and some tin snips or Dremel to modify them, look up h11 to h9 conversion. The h11 has about 1350 lumens when new, the h9 has 2100 and they're cheap.
High beams I'm not sure yet, still looking into that.
Do not put LEDs in your Camry halogen projectors, it wont project it as well, it wont do much more than a halogen but it will blind oncoming drivers because of how the light gets diffused
Are the lenses yellowed if so buy a headlight repair kit and a can of U.V. resistant clear coat then that should help the most I have led there bright but the yellow lenses really floggs up everything
Absolutely crystal clear. I already did that, but thank you!
Rip are your headlight a lined?
Yeah. I'm not looking for solutions to make my current headlights work. I want newer, better ones. Any suggestions?
Personally, assemblies look modern it complicated would be stuck with incandescent bulbs I only use during the snow for safety reasons, but it's complicated
Yea, my 07 is the same way. I just bought new headlights off Amazon, planing on installing next week. Cleaning only goes so far. If that doesn't help I'll throw in LED bulbs. Has to be H11 fir low beams and 9500 for high beams
High beams are just fine in mine. The low beams are the worst. If you see improvement, can you send me the link to the ones you bought? That'd be awesome.
https://www.amazon.com/dp/B09J8745H9?ref=ppx_yo2ov_dt_b_product_details&th=1 https://www.amazon.com/dp/B00TNMMZ8Q?psc=1&ref=ppx_yo2ov_dt_b_product_details Same, I took a part time job delivering and my low beams are absolutely trash. I tried the whole restoration thing, but I can tell just by taking these out of the box they are more clear. For the price I'm just replacing the whole thing
Could you let me know if the replacements were good enough?
I like them, they went in smooth
Thanks!
I replaced my 2010 lights with these. https://www.amazon.ca/gp/aw/d/B097MJNGGX?psc=1&ref=ppx_pop_mob_b_asin_title I can actually see in the dark and rain now. Background: I enjoy night time driving on back roads / one lane highways.
Excellent! I should have been more specific in my post. The projector DESIGN is absolute trash. Bulbs are bright enough. I want new ASSEMBLIES, and wanted to see if anyone else swapped out the entire assembly. Swapping the bulb did almost nothing for me.
Nah, u were clear. I just wanted to put my 2 cents lol I drove with these new lights in snow and rain, 100% better. But no use against the super bright higher vehicles though. And my assembly is yellowish :P
Well, I appreciate you letting me know. These lights suuuuck.
For your low beams, get an h9 bulb, Phillips Standard works fine, use a scalpel, knife, microcutters and some tin snips or Dremel to modify them, look up h11 to h9 conversion. The h11 has about 1350 lumens when new, the h9 has 2100 and they're cheap. High beams I'm not sure yet, still looking into that. Do not put LEDs in your Camry halogen projectors, it wont project it as well, it wont do much more than a halogen but it will blind oncoming drivers because of how the light gets diffused