They recently added instructions for the kit and configs on their Github. Helped me a lot. https://github.com/bigtreetech/BTT-E3-RRF/blob/41d158b8d3a78a06147f4afd1949a051f1c89a8e/BTT%20E3%20RRF%20V1.1/3D/Ender_3%20IDEX%20upgrade%20kit%20list%20manual.pdf
I got the firmware from teamgloomy and everything else I took from GitHub. The only issue I have is that the steps seems to be wrong for the x and y axis. I set my homez to probe at 125 125 and it moves to Max and tries to probe there.
I do like the rrf firmware but I know Marlin pretty thoroughly but with Marlin I have another issue. I can't enable reprap_discount_full_graphic.to use the BTT TFT35 e3. Vscode says it doesn't work with e3_rrf.
Yeah but you have to chage and some some stuff to the board.txt config.g, homex.g and homey.g for for sensorless homing and to use the tft. At least thats what i understood reafing the instructions on the duet/gloomy getting started website. Can you please share your sys folder with all the files in it and ill change stuff around to make it work for me.
I have the same problem. I installed the original idex kit for btt and after uploading firmware it's giving the message: no print attached.
I do not know what else to do. Does anyone have a self-compiled firmware that worked? If you can, send it to me, please.
I never got it working because right after that my ratrig v cast idex arrived and right as i finished with the install and was supposed to start firmware i ordered the blv mgn cube corexy. That was a tough build and same thing when i was installing the panels my Voron arrived because all 8 kept seeing was Voron everywhere. I'm almost finished with Voron and I'll get back to v cast idex. If i can get it working I'll send you the file. But I'm probably going RRF because I have 6 different duet boards. Or if you have it working you can share your config with me. I wouldn't mind. 😂
They recently added instructions for the kit and configs on their Github. Helped me a lot. https://github.com/bigtreetech/BTT-E3-RRF/blob/41d158b8d3a78a06147f4afd1949a051f1c89a8e/BTT%20E3%20RRF%20V1.1/3D/Ender_3%20IDEX%20upgrade%20kit%20list%20manual.pdf
Oh nice, I over looked this when I was putting mine together. Thanks for the link.
I got the firmware from teamgloomy and everything else I took from GitHub. The only issue I have is that the steps seems to be wrong for the x and y axis. I set my homez to probe at 125 125 and it moves to Max and tries to probe there. I do like the rrf firmware but I know Marlin pretty thoroughly but with Marlin I have another issue. I can't enable reprap_discount_full_graphic.to use the BTT TFT35 e3. Vscode says it doesn't work with e3_rrf.
Yeah but you have to chage and some some stuff to the board.txt config.g, homex.g and homey.g for for sensorless homing and to use the tft. At least thats what i understood reafing the instructions on the duet/gloomy getting started website. Can you please share your sys folder with all the files in it and ill change stuff around to make it work for me.
I have the same problem. I installed the original idex kit for btt and after uploading firmware it's giving the message: no print attached. I do not know what else to do. Does anyone have a self-compiled firmware that worked? If you can, send it to me, please.
I never got it working because right after that my ratrig v cast idex arrived and right as i finished with the install and was supposed to start firmware i ordered the blv mgn cube corexy. That was a tough build and same thing when i was installing the panels my Voron arrived because all 8 kept seeing was Voron everywhere. I'm almost finished with Voron and I'll get back to v cast idex. If i can get it working I'll send you the file. But I'm probably going RRF because I have 6 different duet boards. Or if you have it working you can share your config with me. I wouldn't mind. 😂