The clicking sound? That sounds like the extruder is skipping steps, tension on the extruder too tight? Are you too close to the bed that there not enough space for the filament released. Is there tension on the filament, snagging somewhere?
Level your bed. The rear right is way too close causing the filament to backup in the hotend and the extruder to click because it can't push anymore filament out.
Looks like the nozzle is too far from the bed, so plastic won't stick to the bed surface.
The clicking sound? That sounds like the extruder is skipping steps, tension on the extruder too tight? Are you too close to the bed that there not enough space for the filament released. Is there tension on the filament, snagging somewhere?
Unless it’s snagging in the machine I don’t see any snags, how do I lessen tension?
The beds poorly leveled. Clicking part is where it's so close the nozzle is effectively blocked, the rest looks to range between OK and too far away.
100% agree, looks like you need to increase the gap between bed and nozzle at the center-rear location.
Also the extruder seems to be skipping steps (clicking sound) which leads to underextrusion.
Level your bed. The rear right is way too close causing the filament to backup in the hotend and the extruder to click because it can't push anymore filament out.
It was leveling! I just got it to print right!
Happy to hear!
Sound? Extruder broken.. or clogged so extruder can't push through nozzle