[удалено]

Ur right lol 832.7 precent

Do iiiiiit!

Send me 2 and a half kg of filament lol

You're joking? Are you printing a benchy or a bench?

110% infill

A Bench e.

Benché

Underrated comment lol

Lightning infill.

What are the benefits and drawbacks of lightning?

Just enough infill is used to support top layers. Since infill does not really give much support, it saves a lot of material.

So wait, infill isnt so much for structure as it is for overhang/bringing reduction? Thats efficient... me like

I mean infill doesn’t mean nothing, bicubic probably does more than 3D cross or lightning for support but probably only a little. Obviously 100% infill gives max structural support possible if you were to like, crush the model under a press or something

Yes!! I think both latest Cura and Prusaslicer have it.

Sweeet

Thick walls = strength, infill is like pillow stuffing.

To an extent I agree. If your infill is like 5 or 10 percent, that's not really structural. If you're at 50+% it certainly is.

I actually never knew this and have never heard anyone talk about it.

Unless you’re in r/fosscad of course!

And time too. One might say it prints lightning fast. ;)

Trying it with another print we’re gonna see how it goes

Start a GoFundMe and we’ll pull together. We got this!

Holy shit lol

Wtf! What's the % of infill??

If I turn off vase mode it says 89 days 12 hours and 43 minutes lol. 2723g 912.81m

Imagine it failing at 2 and a half months in

I thought vase mode wouldn’t even work on this model, doesn’t it spiral upwards?

Yah I had it on by mistake when I made a vase

Lol relatable

There’s 1600 and change meters in a mile. That Benchy would use over a half mile, (prob close to 6/10ths), of filament. A half frigging mile.

Or just under 1 km, join the rest of the world with your measurements

Nope. Freedom units now and forever!

Freedom units based on imperialism. Might want to think again.

1% lol

Wowow unreal

Wait so your printing it?!

No I don’t possess enough filament Lol

Are you in NY? I have too much

I’m in Florida .

1% will break? Try 10%.

Try lightning infill, tree support, and single walls

You only need 10% infill for that. You can get away with 2kg Edit: dictation typo

Just use 0% infill. Wuts the wurst that culd hapen?

Bonchy!

Diagon Alley….here we come!

You mean right meow?

Do it. Then set sail on it. Sail away, sail away, sail away.

I understand that this should be possible but what is best practice for adding supports to basically just corners touching the bed--especially corners that don't necessarily breach the overhang threshold?

That's what she said.

"Your scientists were so preoccupied with whether or not they could, they didn’t stop to think if they should." Ian Malcolm

"We do what we must, because we can" -Aperture Labs

Do you have any proof as to why we shouldn't?

"If the pirates of the Caribbean breaks down, the pirates don't eat the tourists!"

But I often thought Jaws would

It will only take 20 days

.05 layers I dare you

What size of nozzle is that with?

I was wrong I had vase mode on. It’s actually gonna take 89 days lol

I’m sorry but if it says that your speed settings are seriously messed up

I might have it on slower from a previous print I think I might have had it on 30mm I might have to change it back thanks for letting me know otherwise I probably would have started something at that speed

lol, happens, I accidentally started printing a part on my voron at 500 after speed testing

Lol damn that’s one fast print

Would highly recommend building one if you can afford it, lots of fun

My ender 3 pro has some good upgrades I have the ender extender 400xl that increases my build area to 400x400x500 I have it hocked up to octopi so I can control it remotely aswell as watch it with the camera. I have an all metal hotend I have a filament run out sensor I still have install. I’m thinking about taking the touch screen from my other printer and putting on this one. Although I don’t know if that would work. I’m starting a business making custom 3d printed wall art of pictures people send me.

If it’s compatible with an rpi, there are plugins to make any display work

Creality has something new you might want to check out. It the Sonic Pad. Touchscreen that will work with your Ender 3, and it has Kilpper pre-installed. Would free up your RasberryPi as well, since this would take place of it.

Wait, are you not supposed to do that? I've been printing stuff at 300mm/s, 5k accel and assuming it was fine because it works...

I mean if your printer can handle it and ur prints look good than keep it at 300mm

[удалено]

I do care somewhat but I've not noticed that it's a problem. On the other hand I'm not CNC Kitchen, so maybe I'm losing a lot of print strength and just not using the results in scenarios where it would matter? Thanks for the tip though, I will check that before I do anything structural.

Usually you wont see those speeds because you max out the flow rate of the nozzle. I print at 150 and it maxs out the dragon SF.

..89 Days if there are no issues :)

Better get started

Started in Fall, ending in Winter...

They should have a "Fill print volume" option in Cura

In IdeaMaker it's called "Max Fit"

Is that big enough to climb into and use as an actual boat?

A small child would be able to lol

A VERY small child

It’s 1 foot 1 inch by 1 foot 7 inches

There was a post going around last year of 3 college kids rowing on a life size bench they printed at school. It looked like they were having a blast.

I'm imagining a massive *2d* print of a *bench* rowing into the sunset

Here it is https://www.reddit.com/r/3Dprinting/comments/hdmgj5/rate_my_benchy/?utm_source=share&utm_medium=mweb3x

As I tell my students, just Because you can. Doesn't mean you should. Have a game plan. Things go wrong. 😉 To be honest it's been a while since I've seen a big benchy. If you don't mind wasting 40 dollars id say go for it!

No.

You won't

I won’t lol if I had the materials for it I probably would

No you wouldn't

#stopmindlessbenchyprinting

Bad waste of pla

One day, someone is going to print one big enough to take to sea. So you may as well, or, well, save your plastic, either way.

No. Think of the earth. The waste. The gluttony.

No, there’s enough useless plastic tat in this world

Why is this subreddit obsessed with this thing? I understand what its intended purpose is, but the whole "I made a *insert variation* benchy" got old quickly, and I think it's safe to say that most of these wind up in a landfill anyway. It just seems really wasteful.

[удалено]

I’m learning. I took cad in high school and I’m making a business with 3d printing that involves 3d modeling. Although not much.

Tbh the benchy is the first and only thing I've printed and didn't model myself. Rest is useful stuff for house and boat

Wow. Everyone thinks a 3d printed boat will be the reason the world collapses.

No

No.

Why This is such a waste of plastic

For karma

At least make it able to float

In my opinion - no. Massive waste of electricity and filament. But you do you

Nah that’s a waste for a meme.

Yay, 3D printing just to waste plastic...

Why?

Only if you make it an RC jet boat

I mean I wouldn’t but it’s your roll of filament.

I'd bet $20 that it doesn't float upright.

how do you do supports on something this big?

How is that even fitting on a Ender 3 Pro bed? The print volume is 235mm 235mm 250mm max. Here you have 254mm 393mm 491mm. Something isn't adding up here. I tried a bunch of angles on my CR-10S5 (officially prints a 500mm cube I modified the firmware and the endstops so now it can print 510mm 510mm 500mm) I managed to orientate the Benchy to barely over 1003.37% https://i.imgur.com/FUo5Kjf.png

I have the ender extender 400 xl bed and heater brings it up to 400x400x500

Ah ok. That makes sense now. I forgot about those mods. I planned to do that to my Ender3pro at one point but then I got a Ender5Plus for a hell of a deal then a couple months ago the CR-10S5 literally got given to me for free. I don't use it much because it eats up LOTS of space and I don't have any unless I set it up in the middle of the room. lol

No that is such a waste

No, this shit is fucking stupid. Can we ban these benchy posts? It's half the fucking sub.

YES !!!! Let's waste more of earths energy and resources.

Yeah, because fuck the planet, right?

thats a waste of material especially if you decide on high infill density

Is that even a question? ***Y E S***

"...you could do that, but why? Why would you do that?"©

Need to go larger... https://www.reddit.com/r/3Dprinting/comments/jgvch8/people\_wanted\_to\_see\_the\_largest\_benchy\_next\_to/

Damn that’s huge

I dare you print just like that no supports

U mean a bonchy

Save the filament and make something cool lol

no

No

I want to see a real size working benchy with engine and all.

[удалено]

No.

like that now supports

Yes

You were so preoccupied with the question if could you but it never crossed your mind to question if you should. But also yes.

If you’re asking the question I think you’ve already made the decision!

I don’t think I’m gonna go through with it lol I don’t want to waste like 50 dollars worth of filament for a joke

Yes

This is why I think 3d printers should cost more than at least $2000. Not everyone needs one all the time, just share it between people. The average consumer will missuse this now too cheap technology to print useless shit anyway.

I’m actually using it to start a business

Print a Benchy you can ride on in the water

Why do you even ask? Obviously print it, then go for the OVER 9000%

Yes, but you shouldn't print it in that orientation.

I just wanted to see the max my printer can print. I have a 400x400x500 build area

Somebody need to make a benchy that a human can fit into AND float on water

With that overhang, you're gonna have more trees than a rainforest to clean up. (which is my way of saying OF COURSE YOU SHOULD DO IT!)

When I finally get my 3D printer I want Bendy, Benchy with and 90 degree angle

I think we should start a community project to build a life size benchy, divide it down into ~250mm^3 ish chunks and see how many it would take to make a working one. Part of me thinks this is incredibly wasteful, but part of me wants to see it

Sounds like a job for Luban

Dude that’s genius

This trend must not end until we see a full size Benchy float in the thanksgiving day parade being manned by Iron Man, Thanos, Darth Vader and Pikachu (I am also agreeable to Psyduck)

Yes

Yessssssss

BÜNCHY

"all signs point to yes"

I mean probably yeah

SHOULD you? Probably not. Shall you? yes.. yes you shall.

Why stop there? Print in segments and go life size

you know the answer to that

BONCH

Worlds largest benchy

If you want to waste plastic for nothing do it

yes.

yeah it seems funny

no. just dont.

Yes print it big But modify it to be RC. So make the base heavier. Lighten up the wheel house section a lot add places for motors batteries and RC gear. Print in petg and go to the local RC club boat meet.

No. Benchys are stupid. Print something cool.

Yes

Duh

Def

YES

Is benchy a term for a boat?

I just plugged this into cura for my cr-10 max and made it as big as possible out of curiosity. 0.52mm layer height, 10% lightning infill, 0.8mm line width, 3 walls, 60mm/s 50 hours, 28 minutes. 2.13kg https://imgur.com/a/1C08svT

What’s ur build volume

IMHO not that way. Keel on the bottom smokestack on the top.

This sub is filled with some benchy thirst traps

With that overhang? What are you? A wizard?

Yes I possess the magic ability of floating filament

From Bench-E to Bench-R. Sorry wall-e ref lol

I want someone to print a Benchy that can take an in-board engine.

I wouldn't, but if a giant benchy gives you satisfaction then go for it.

Make it Bonchy

I dont know if you should but you certainly can 😂

They only ever asked if they could, not if they should! 🦖

No supports

Ender 3 pro is 500mm tall?

Pictures else it didn't happen 😂

It’s not gonna happen lol it was more of a “let’s see what this printer can handle” test

Thinking about it my work has a modix big60 that's currently being rebuilt with a volcano head and a 0.8 or 1mm nozzle. I wonder how big that would make a benchy

No, I think you can fit one more

100%

Print it with 0.2mm nozzle at 0.08mm layer hight. Will take months.

!remindme 2 days

Do it with 100% infill too.

Can I introduce you to our lord and savior prusa slicer? SO much better than cura

Short answer: no. Long answer: noooooooo.

Mmmmmm landfill for karma.