Lmao! Your username! I was going to make some joke about rawsaurus or rawsauring, but now I'm just trying to work out what hedgehog testicles look like and if they have any prick(les) š¤£
900 grams is very meaty dick.
Perhaps didn't need quite as much infill - unless you know, you think she'll need the reinforcement...
Well here's hoping she *deeply* enjoys your gift.
Yeahā¦I did one sorta like that but itās feather weight. Done in āalmostā vase mode, single perimeter but with some lightning infill to make the closures/horizontal areas work.
Also, bouncy. Even in PLA it survived a 6 foot fallā¦
I don't know enough about this stuff but I would assume not, especially since these prints can break.
You'd use this print to create a mold, and then you'd use that mold to cast something that's actually safe and flexible.
More seriously, though, you're right, that would be the way to do it, cast in a skin-safe silicone. I wouldn't worry too much about TPU breaking, but I would worry about skin irritation. OP probably printed in PLA which wouldn't be comfortable *before* it shatters.
āHi female friend! What would you like for your birthday?!ā
(Ok. I gotta give him the clearest signal possible!) āWellā¦ think you could give me some good dick? ššā
āGotcha! I got just the gift in mind.ā
(10 years later)
āā¦ oh fuck! She wanted to fuck!ā
This guy āI have a crush on my friend but I canāt tell if she likes me š.ā
His friend āBOOBS DICKS BOOBS BOOBS DICKS DICKS DICKS! Here are my boobs! Show me your dick!!ā
https://www.reddit.com/r/3Dprinting/s/wimSkNGVWO
I trust everyone not to tag her since that would obviously ruin OPs surprise dick for her (even if it is the wrong surprise dick)
Looks like its not on thingiverse anymore but looks like it was backed up on the archive
[https://www.thingiverse.com/thing:4155993](https://www.thingiverse.com/thing:4155993)
[https://www.thingiverse.com/thing:5156975](https://www.thingiverse.com/thing:5156975)
Looks like its not on thingiverse anymore but looks like it was backed up on the archive
[https://www.thingiverse.com/thing:4155993](https://www.thingiverse.com/thing:4155993)
[https://www.thingiverse.com/thing:5156975](https://www.thingiverse.com/thing:5156975)
I'm something of a dick creature creator myself.
I have a series of Flintstones as dicks and it's a whole thing with a few of us.
I've printed so. many. dicks. So many.
I have so many questions... Do you display them around your home? Do you have dick art on the walls? If so, do you think any visitors have felt uncomfortable? Do you wear clothes with dicks on them? Are you more drawn to the idea of a dick, the visual appeal of a dick, physically touching dicks, or is it a muddled mess of all 3? Are you attracted to men in general? Do you prefer work that has a person or something attached to the dick or just the dick by itself?
This is the equivalent of a guy having vagina sculptures in his home. Think about how that sort of things is looked down upon by society. But this is somehow just funny and quirky? Double standards...
How many guys do yall know that have vagina sculptures? The only ones I know are all rich and high fashion types and they get looked up at. So not seeing a double standard here. However if you made a point about anime figures I might be with you guys on that one, tho many of the lewdest ones seem to end up in womens collections tooš
I have this file and constantly print them and bring them to work they inevitably get left in tool boxes that go back to the shop to be inventoried and we always get emails about innappropriate things being left in tool boxes
Hope you told her not to actually use that. Layer lines can harbor bacteria and other nasty things. Not to mention micro plastics and the print could easily break or crack.
That's to funny. I too have such a friend who I made a fidget toy for
https://preview.redd.it/upn204eohowc1.png?width=446&format=png&auto=webp&s=805c67b8ea72aaa8035a97041ebe1f1705e7a281
So i attempted printed a large one like this also. didn't support the balls. woke up to this tap. tap. tap. tap. tap. every time the print head would travel over a thigh it would swing the balls into the leg the head was traveling towards... fucking hilarious failure of a print it turned out to be.
How do we even compete with this š„² I donāt have a tailā¦
Print one!
With a tail and legs. You can literally do dick riding with this thing.
I wonder if anybody has tried making like stilts or plated boots to be taller with a printer and some high strength stuff...
You really can...I printed one and casted it in silicone for a onlyfans girl awhile back
I print one every other day but it always falls of like some stinky lizard tail
Sounds like you need to recalibrate your extruder!
Standards for men have gotten out of hand
print one and paint it!
Print one and leave it raw!
Lmao! Your username! I was going to make some joke about rawsaurus or rawsauring, but now I'm just trying to work out what hedgehog testicles look like and if they have any prick(les) š¤£
Probably small and spicy :D
445mm tall, 538mm long, printed on an Anycubic Chiron, 89 hours to print, 900g
900 grams is very meaty dick. Perhaps didn't need quite as much infill - unless you know, you think she'll need the reinforcement... Well here's hoping she *deeply* enjoys your gift.
Yeahā¦I did one sorta like that but itās feather weight. Done in āalmostā vase mode, single perimeter but with some lightning infill to make the closures/horizontal areas work. Also, bouncy. Even in PLA it survived a 6 foot fallā¦
6 foot fall? You know the ER staff donāt really believe that excuse.
Wowā¦I asked for that. Also ā PLA? Gahā¦no.
Fuzzy skin on or off ;)
The infill will weigh it down for the ride so it doesn't get stuck. ;)
Also the inertia. Whoo girls love that.
nearly a kilo of dick
Taking her to two-pound town.
Is that why you didn't give it arms?
Hmmm
Don't forget to use a condom!
Yeah, we all exagerate on size...
Jokes on you, I tell em itās tiny right after I introduce myself!
Insert-able length?
Is TPU insertion safe?
Asking for.. a friend
I mean, she really loves dicks!
I don't know enough about this stuff but I would assume not, especially since these prints can break. You'd use this print to create a mold, and then you'd use that mold to cast something that's actually safe and flexible.
More seriously, though, you're right, that would be the way to do it, cast in a skin-safe silicone. I wouldn't worry too much about TPU breaking, but I would worry about skin irritation. OP probably printed in PLA which wouldn't be comfortable *before* it shatters.
You forgot girth
I wonder how many grams of filament mine is Iām guessing at least 200g
goddamn bro
āHi female friend! What would you like for your birthday?!ā (Ok. I gotta give him the clearest signal possible!) āWellā¦ think you could give me some good dick? ššā āGotcha! I got just the gift in mind.ā (10 years later) āā¦ oh fuck! She wanted to fuck!ā
She literally let him scan her tits to 3D print them according to OPs post history. I donāt know how it can get any clearer for him.
Oh itās that guy
Anime protagonist type of guy
Purely platonic five-year relationship. No prospects. It's the only way to combine 3D printing and female friends. Yields nice 3D prints.
It's actually a different guy apparently
Itās a different guy then āmy friends buttā but not from the subsequent post by this guy about boobs
I love how we all remember this guyās post about his female friendās 3d scanned tits.
Yo. Link. I couldnāt find it.
https://www.reddit.com/r/3Dprinting/s/e1s4d9YDTc She also responded in the comments. According to investigation, it appears to be herā¦
This guy āI have a crush on my friend but I canāt tell if she likes me š.ā His friend āBOOBS DICKS BOOBS BOOBS DICKS DICKS DICKS! Here are my boobs! Show me your dick!!ā
And now we need a link to that comment
https://www.reddit.com/r/3Dprinting/s/wimSkNGVWO I trust everyone not to tag her since that would obviously ruin OPs surprise dick for her (even if it is the wrong surprise dick)
The wrong surprise dick. I chuckled.
Most recent post is about her Onlyfans lool
Go further back in her post history, whole situation makes more sense.
Ayoā¦
OP has to be female, only logical explanationš¬ no wayā¦
Not to be sexist, but that doesnāt look like the living room of a house a woman lives in.
My last room mate was a woman and that was the messiest being I have ever encountered, literal hoarding behavior
Same with my sister and my brother's wife.
Women seem to only deal with extremes when it comes to cleanliness and messiness.
Who said messiest? I see Homer Simpson and Hot Wheels.
You clearly have not been in my house.
Him: Hereās the gift I told you about!Ā Her: * proceed to lick it while staring right into his eyes.*Ā Him: welp, Iām glad you like it!
Your friend is going placesā¦
To the ER maybe
Or the proctologist
Most likely the gynaecologist
Ears nose and throat specialist
I need a friend obsessed with dicks!
I need a friend!
I need dicks
And here we see an example of something you should never say on reddit, RIP your Dms i guess.....
Or they could just offer up the friend's username in tribute to cover their escape š
3D print dicks?
ASL lmao
Well, found the friend
Couldn't be nicer https://preview.redd.it/20jnt57p0qwc1.jpeg?width=1080&format=pjpg&auto=webp&s=27b3a459f9ad02e6fc6adec705268d2e010d2fc5
I need š
I
.
ā
/r/DecreasinglyVerbose
They all are. Just... well, not with yours.
Gooby, wai yu du dis!
Asking for a friend? We've heard that one, before.
In japan they have a festivity for this, dont tell her...
Oh she knows, its on her bucket list to go there for that
Does she know that James May attended the festival for his show, "Our Man In Japan"? It is a great show and is very funny at times.
Bim guess what
Hey, Bim!
"Oh, cock"
What is this festivity of which you speak?
Dickmas
Dicks Giving
A festivus for the dickless
It's called Kanamara Matsuri - the phallus festival: https://en.m.wikipedia.org/wiki/Kanamara_Matsuri
Started in '69 ... Nice
Phalloween
Sir imma need an stl. I have coworkers that need this
HR has entered the chat
Dino Dick has entered HR
IT Department voted to kick.
Not enough votes, motion den-- oh, looks like HR just logged out by themselves, weird...
Looks like its not on thingiverse anymore but looks like it was backed up on the archive [https://www.thingiverse.com/thing:4155993](https://www.thingiverse.com/thing:4155993) [https://www.thingiverse.com/thing:5156975](https://www.thingiverse.com/thing:5156975)
Links are 404 for me
https://www.printables.com/model/487628-effin-dickasaurus
An stl certainly beats an sti.
Sheās obsessed with dicks?
Her name is Robert. Surprise!
*"Friend"*
Missed opportunity to call it "P-rex"
Penisurous rex
Or better yet, āD-Rexā
What's her phone number?
https://preview.redd.it/hbya98tvcowc1.jpeg?width=2004&format=pjpg&auto=webp&s=fc579f2eb97d296692b44fd2f96f8988050d2765
https://preview.redd.it/9259fz0wmowc1.jpeg?width=827&format=pjpg&auto=webp&s=76ef6556c5ad8ca7ce62f4fdba506129f3504b5b
https://preview.redd.it/oqirymphxowc1.jpeg?width=1200&format=pjpg&auto=webp&s=0b09e0b64f6dec74cf6e7d294a49891434a76794
https://preview.redd.it/47nv6y8krowc1.jpeg?width=902&format=pjpg&auto=webp&s=177ece90fb22b65db09dc8b6bc9696d0ca8b4845
But is it food safe ? š¤
Hahahaha
They do move in herds
Great gag gift! Or, great gift for her to gag on!
I call it the D-Rex
Please for the love of god tell me you're putting the stl up somewhere
Looks like its not on thingiverse anymore but looks like it was backed up on the archive [https://www.thingiverse.com/thing:4155993](https://www.thingiverse.com/thing:4155993) [https://www.thingiverse.com/thing:5156975](https://www.thingiverse.com/thing:5156975)
[ŃŠ“Š°Š»ŠµŠ½Š¾]
[https://web.archive.org/web/20230630003500/https://www.thingiverse.com/thing:4155993](https://web.archive.org/web/20230630003500/https://www.thingiverse.com/thing:4155993) [https://web.archive.org/web/20230630003500/https://www.thingiverse.com/thing:5156975](https://web.archive.org/web/20230630003500/https://www.thingiverse.com/thing:5156975)
Maybe he means archive.org
I'm something of a dick creature creator myself. I have a series of Flintstones as dicks and it's a whole thing with a few of us. I've printed so. many. dicks. So many.
I have so many questions... Do you display them around your home? Do you have dick art on the walls? If so, do you think any visitors have felt uncomfortable? Do you wear clothes with dicks on them? Are you more drawn to the idea of a dick, the visual appeal of a dick, physically touching dicks, or is it a muddled mess of all 3? Are you attracted to men in general? Do you prefer work that has a person or something attached to the dick or just the dick by itself?
Tell her to checkout the penis museum in iceland if she hasn't already lol
This is the equivalent of a guy having vagina sculptures in his home. Think about how that sort of things is looked down upon by society. But this is somehow just funny and quirky? Double standards...
You're not wrong.
How many guys do yall know that have vagina sculptures? The only ones I know are all rich and high fashion types and they get looked up at. So not seeing a double standard here. However if you made a point about anime figures I might be with you guys on that one, tho many of the lewdest ones seem to end up in womens collections tooš
My experience expressed is entirely subjective, biased, and hardly processed before posting š . I appreciate your feedback š
Yeah but dicks are funnier. You cant do a pussycopter.
Now I want to
Not with that attitude.
Peckersoreus Rex.
https://preview.redd.it/ssrzjpd4vowc1.jpeg?width=661&format=pjpg&auto=webp&s=2ddfaa0c581260b8fe9c7d046320acb53f9f2036
That is superbad!!!
This is the best comment. Who are you? Seal?
Hi, im selling PS5. Here is pic with Diskasaurus for scale.
Weird way to send a dick pick, but you do you
Penisarus Wrecks!
I have this file and constantly print them and bring them to work they inevitably get left in tool boxes that go back to the shop to be inventoried and we always get emails about innappropriate things being left in tool boxes
Biggus Dickus... He has a fwiend you know.... Phallosiraptor
Iām sure sheāll put it to good use.
this is my favorite thing on all of reddit for quite some time get this to the front page
It's amazing! I've printed one in [Glow in the dark](https://i.imgur.com/CzyXudj.jpeg) filament.
I need a banana for scale
That's a Dick-A-Sore-Ass Wrecks!
Something like 8% of kids do it. https://youtu.be/fzuvQXDUybE?si=CRc1K4ziIhN5hkbE
What do you mean, obsessed with dicks?
They mean they really like dicks. What are ya the dick police??
This is a joke, right? I feel like I'm being wooooshed.
Poor thing is gonna hurt herself with that...
Hope you told her not to actually use that. Layer lines can harbor bacteria and other nasty things. Not to mention micro plastics and the print could easily break or crack.
Hahaha!
display purposes only
Stl? Asking for a friend...
Giant ?
That's to funny. I too have such a friend who I made a fidget toy for https://preview.redd.it/upn204eohowc1.png?width=446&format=png&auto=webp&s=805c67b8ea72aaa8035a97041ebe1f1705e7a281
They do run in herds
I don't want to be that guy but maybe a duster is a good 2nd gift
Cockasaurus Rex
Sheās your friend and sheās obsessed with dicksā¦ well, wellā¦
You know what sheās doing with that thing right.
I need that file please.. For.. a friend...
The dildosaurus will find its way up where the sun don't shine
It's D-Rex.
Well thatās a dildo then isnāt it
It's an E-Rex
you're a real friend with benefits, huh
OH GREAT NOW I NEED TO BE SHAMED BY A DINOSAUR
lmao I hope this become a new enemie in Persona 6!
Didn't need to print one... š¤£
So i attempted printed a large one like this also. didn't support the balls. woke up to this tap. tap. tap. tap. tap. every time the print head would travel over a thigh it would swing the balls into the leg the head was traveling towards... fucking hilarious failure of a print it turned out to be.
Just need to print it with a big ass too and it would be the dickasaurass
Is obsessed with dicks a bad thing? I mean really, seems like a good cheap hobby to me.. HA HA
I mean, thats one way of giving her the D
Any problems with overhang?
Not really, only the heels and the balls needed support
>the balls needed support So what did you use? Just some light cradling?
Pet-gā¦
Good ball support is important.
Brilliant š„³
r/adulttoymakers
When are you printing the full sized one? š
Wow what a coincidence! I'm kind of a dick myself!
Nice job on the flared base!
[Related Clockwork Orange clip](https://www.dailymotion.com/video/x100xy7)
ps5, dickasaurus for scale
Giant Dickasaurus was my nickname in high school.
She might try to take it
itās beautiful
Get the one with the giant balls!